Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Automatic Titrators
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
BL10 Black Stone Dosing Pump 10.8 lph 3 bar
Reagents for HI 700 Checker HC ®, 25 Tests
HI721 Checker HC ® - Iron
BL981411-1 pH Mini Controller (Res 0.1pH) - 220V
HI1217D - Replacement pH Electrode
pH/EC/°C Multiparameter Probe for HI 9811-5, HI 9812-5 & HI 9813-5
Reagents for HI 755 Checker HC ®, 25 Tests
Reagents for HI 711 (Total Chlorine) Checker HC ® (Total), 25 Tests
HI98308 PWT - Pure Water Tester - Conductivity (up to 99.99 µS/cm)
HI7010L - 10.01 pH@25°C - SQ - 500ml
HI727 Checker HC ® - Color of Water
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI93738-01 Chlorine Dioxide - Reagents-Kit - 100 Tests
HI763100 Digital conductivity electrode - 4 ring, platinum (edge)
HI76301D Four ring Conductivity probe
HI2004 - edge® Dedicated Dissolved Oxygen Meter
HI7036L - 12.41 g/L (ppt) TDS @25°C - 500ml
HI700 Checker HC ® - Ammonia, LR
HI76313 Platinum, four ring Conductivity/TDS probe
HI775 Checker HC ® - Alkalinity in fresh water (dKH)
HI3812-100 - Reagents for CTK Härdness Total
HI731331 - Glass Cuvette 4 pcs. - Serie HI967xx & HI93414 & HI98703
HI93746-01 Iron LR - Reagents -100 Tests
HI991300 Multiparameter pH/EC/TDS/°C - EC to 3999 µS
HI711 Checker HC ® - Total Chlorine
HI7635 - Industrial Conductivity Probe
เครื่องวัดอุณหภูมิอาหาร
PCA 310 Online Chlorine Analyzer & Controller
HI93720-01 Hardness Calcium - Reagents -100 Tests
HI200M 1L Magnetic stirrer with stainless steel cover plate, 230V
HI7035L - EC 111800 µS/cm@25°C - 500ml
HI93754B-25 Medium Range COD Reagent (0 to 1500 mg/L)
HI3810 CTK Dissolved Oxygen
HI93740-01 Nickel LR - Reagents - 50 Tests
HI5421 Research Grade Dissolved Oxygen and BOD Meter
HI3131B - Refillable Combination ORP Electrode for Titration and Laboratory Use
HI3818 CTK Carbon Dioxide
HI1297D - pH/ORP-Electrode
HI7042S Refilling Solution for Galvanic Probe, 30ml
HI93750-01 Potassium - Reagents - 100 Tests
Chlor Frei - Reagenzien-Kit - 100 Tests
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%