Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดค่าเหล็ก รุ่น HI721
น้ำยามาตรฐานสอบเทียบ
HI7609829-4 - Conductivity / Turbidity Sensor for HI9829 Multiparameter
HI3810 CTK Dissolved Oxygen
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI3230B - ORP Electrode
HI726 Checker HC ® - Nickel, HR
สารละลายมาตรฐานความขุ่น 20 NTU
HI700661P - RfE - Landwirtschaft - 25x20ml
HI5011 - 11.00 pH@25°C - TQ - 500ml
HI5001 - 1.00 pH@25°C - TQ - 500ml
HI98120 ORP/°C-Tester, waterproof
HI93102-0 AMCO-AEPA-1 Calibration Solution at 0 NTU, 30 ml
HI3834-050 - Reagents for CTK Iron
HI38020 CTK Chlorine Free & Total
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
HI76409A/P DO Membrane for probe HI 76409 (5 pcs)
เครื่องวัดสีในน้ำตัวอย่าง HI727
BL983313-1 EC Mini Controller, 0 to 1999 µS/cm, 230V
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI763100 Digital conductivity electrode - 4 ring, platinum (edge)
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
HI70670L - RfE - Salzablagerungen - 500ml
หัววัดค่าการนำไฟฟ้า แบบดิจิตอล Four ring รุ่น HI763100
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI4016-03 ISE 1000 mg/L (ppm) Sodium Std , 500 ml Bottle
HI145-00 Thermometer (°C) with T-shaped (125mm)
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
HI3831T CTK Chlorine Total
CTK Härte Gesamt
HI38000 CTK Sulfate
HI98127 pH/°C-Tester (0.1 pH resolution) - waterproof
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI11311 พร้อม Matching pin ใช้งานสำหรับตัวอย่างทั่วไป
HI7609829-4 - Conductivity / Turbidity Sensor for HI9829 Multiparameter
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
Reagents for HI 726 Checker HC ®, 25 Tests
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
HI5001 - 1.00 pH@25°C - TQ - 500ml
ซัลไฟด์สารต้านอนุมูลอิสระบัฟเฟอร์
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI4013-01 ISE 0.1M Nitrate Std , 500 ml Bottle
HI3847 CTK Copper
เครื่องวัดคลอรีน
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%