Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
 HI1292D - pH Electrode (Soil)
HI1292D - pH Electrode (Soil)						 HI7082 Electrolyte Solution 3.5M KCL, 4 x 30 ml
HI7082 Electrolyte Solution 3.5M KCL, 4 x 30 ml						 HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe
HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe						 HI3835 CTK Salinity
HI3835 CTK Salinity						 HI93705-01 Silica - Reagents - 100 Tests
HI93705-01 Silica - Reagents - 100 Tests						 HI3822 CTK Sulfite
HI3822 CTK Sulfite						 HI93551 K,J,T-Type 1-Channel Thermometer
HI93551 K,J,T-Type 1-Channel Thermometer						 HI93732-01 Dissolved Oxygen - Reagents - 100 Tests
HI93732-01 Dissolved Oxygen - Reagents - 100 Tests						 Reagents for  HI 758 Checker HC ®, 25 Tests
Reagents for  HI 758 Checker HC ®, 25 Tests						 HI937520-01 Magnesium - Reagents -50 Tests
HI937520-01 Magnesium - Reagents -50 Tests						 HI70004P - 4.01 pH@25°C - SQ - 25x20ml
HI70004P - 4.01 pH@25°C - SQ - 25x20ml						 HI7034L - EC 80000 µS/cm@25°C - 500ml
HI7034L - EC 80000 µS/cm@25°C - 500ml						 HI3810 CTK Dissolved Oxygen
HI3810 CTK Dissolved Oxygen						 HI3810-100 - Reagents for CTK Dissolved Oxygen
HI3810-100 - Reagents for CTK Dissolved Oxygen						 HI93703-05 AMCO-AEPA-1 Calibration Solution at 500 FTU, 30 ml-Copy
HI93703-05 AMCO-AEPA-1 Calibration Solution at 500 FTU, 30 ml-Copy						 BL983329-1 TDS Mini Controller 0.0 to 999 mg/L (ppm) - 230V
BL983329-1 TDS Mini Controller 0.0 to 999 mg/L (ppm) - 230V						 HI5013 - 13.00 pH@25°C - TQ - 500ml
HI5013 - 13.00 pH@25°C - TQ - 500ml						 HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm						 
				 
				 
				 
				 
				 
				 
				 
				