Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
CTK Härte Gesamt
HI62911D - pH/°C Electrode
HI98301 DiST®1 TDS-Tester (up to 1999 ppm)
BL983314-1 Resistivity Mini Controller, 0.00 to 19.90 MΩ/cm - 230V
เครื่องวัดคลอรีน
HI731318 - Cuvette Cleaning Cloth (4 pcs)
HI96729-11 CalCheck ™ Fluoride LR Calibration-Set
HI3618D - ORP/°C Electrode
เครื่องควบคุมค่าความนำไฟฟ้า
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
HI731325W - Cap for Cuvette 4 pcs. - Serie HI832xx
HI70681L - Ink Stains - 500ml
HI5004 - 4.01 pH@25°C - TQ - 500ml
เครื่องวัดค่าเหล็ก รุ่น HI721
HI95747-01 Copper LR - Reagents - 100 Tests
HI4108 - Feststoffelektrode, kombiniert
HI981402 pH-Indicator with LED-Alarm & Electrode PRONTO
HI180F Magnetic mini stirrer, dark blue
HI3896 CTK Agriculture Test Kit, Professional
HI3811-100 - Reagents for CTK Alkalinity
สารละลายมาตรฐานความขุ่น 20 NTU
Multiparameter Benchtop Photometer and pH meter
เครื่องวัดปริมาณคลอรีนรวม ช่วงสูงมาก รุ่น HI771
HI98128 pH/°C-Tester (0.01 pH resolution) - waterproof
BL983327-1 EC Mini Controller upto 10.00 mS/cm, 230V
HI93749-01 Chromium VI LR - Reagents - 100 Tests
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
Reagents for HI 726 Checker HC ®, 25 Tests
Calibration Standard HI 721 Checker HC ®
BL983315-1 TDS Mini Controller 0.0 to 199.9 mg/L (ppm) - 230V
Reagents for HI 761 Checker HC ®, 25 Tests
Calibration Standard HI 755 Checker HC ®
HI8936CN EC - Transmitter - 0 to 1999 µS/cm