Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
HI5009 - 9.00 pH@25°C - TQ - 500ml
เครื่องวัดคลอรีน
HI5003 - 3.00 pH@25°C - TQ - 500ml
HI96735-11 CalCheck ™ Hardness LR / MR / HR Calibration-Set
เครื่องวัดสีในน้ำตัวอย่าง HI727
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
เครื่องวัดค่าเหล็ก รุ่น HI721
HI717 Checker HC ® - Phosphate, HR
HI4014-01 0.1 M Potassium Standard
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
สารละลายมาตรฐานความขุ่น 20 NTU
BL983321-1 TDS Mini Controller 0.00 to 19.99 mg/L (ppm) - 230V
HI1005 - pH Electrode, Flow-thru Monitoring for PCA
เครื่องควบคุมค่าความนำไฟฟ้า
BL983315-1 TDS Mini Controller 0.0 to 199.9 mg/L (ppm) - 230V
BL983327-1 EC Mini Controller upto 10.00 mS/cm, 230V
HI76405 Electrode Holder with Steel Base
BL983314-1 Resistivity Mini Controller, 0.00 to 19.90 MΩ/cm - 230V
HI770 Checker HC ® - Silica, HR
PCA 320 Online pH / Chlorine / °C - Analyzer / Controller
HI766F K-Type, High Temperature Probe
H300N 2.5L Heavy Duty Magnetic Stirrer
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
HI4001-00 ISA Alkaline for Ammonia & Cyanide ISE, 500 ml Bottle
HI98309 UPW - Ultra Pure Water Tester - Conductivity (up to 1.999 µS/cm)
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
Calibration Standard HI 721 Checker HC ®
HI8936CN EC - Transmitter - 0 to 1999 µS/cm