Name: HI710221 Conductivity and TDS - 2 setpoints with PID
Brand: HANNA Instruments Inc.
SKU: HI710221-2
Availability: OutOfStock

Fully programmable microprocessor memory

Dual set points
mA & VDC recorder output
Differential input for ground loop protection
Automatic one or two point calibration
Last calibration data
Manual or Automatic Temperature Compensation
Extensive range for both conductivity and TDS

The HI 700 series of regulators offer state of the art specifications for your process control. They can be configured for ON/OFF, proportional, PI or PID control. Thanks to our exclusive technology, they can be customized to best fit your application. Bright LED’s show the current status even from a distance. A menu-driven display aids the user throughout the operations with running messages and clear prompts. All relevant parameters can be simply adjusted and will remain memorized until overwritten.

With self-diagnostic features and extractable terminals, installation and maintenance are fast and simple. Password protection guarantees that the calibration and predetermined parameters cannot be altered unnecessarily. The controllers can operate with four-ring probe or 4-20 mA signal. They accept probes with or without a built-in Pt100 temperature sensor.

Order Information:
HI 710 model is provided with dual set point, ON/OFF and PID controls and is supplied with mounting brackets and instructions.

HI 710221-2 dual setpoint, on/off and PID controls, analog output, 230V

Product Manual:

HI 710 Series (Process Instrumentation)

Specification :

Range	Conductivity	0.0 to 199.9 µS/cm; 0 to 1999 µS/cm 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
	TDS	0.0 to 100.0 mg/L (ppm); 0 to 1000 mg/L (ppm) 0.00 to 10.00 g/L (ppt); 0.0 to 100.0 g/L (ppt)
	Temperature	-10.0 to 100.0°C
Resolution	Conductivity	0.1 µS; 1 µS; 0.01 mS; 0.1 mS
	TDS	0.1 ppm; 1 ppm; 0.01 g/L (ppt); 0.1 g/L (ppt)
	Temperature	0.1°C
Accuracy @ 20°C	EC/TDS	±0.5% f.s.
	Temperature	±1°C (outside)
EC Calibration		automatic or manual at 1 point
Temperature Compensation		automatic or manual, -10 to 100°C with adjustable temperature coefficient from 0.00 to 10.00%/°C
TDS Conversion Factor		adjustable from 0.00 to 1.00
Outputs		analog: isolated 0-1 mA, 0-20 mA and 4-20 mA; 0-5 VDC, 1-5 VDC and 0-10 VDC or digital: RS485 bi-directional opto-isolated
Analog Input		4-20 mA
Set Point Relay		two contact outputs SPDT 5A-250 VAC, 5A-30 VDC (resistive load), fuse protected (2A, 250V fast fuse)
Alarm Relay		contact output SPDT 5A-250 VAC, 5A-30 VDC (resistive load), fuse protected (2A, 250V fast fuse)
Power Supply		115 VAC ±10% or 230 VAC ±10%; 50/60 Hz
Power Consumption		15 VA
Over Current Protection		400 mA 250V fast fuse
Environment		0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions		panel cutout: 140 x 140 mm, instrument: 144 x 144 x 170 mm
Weight		1.6 kg (3.5 lb.)
	Dimensions	81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)