HI97747C เป็นโฟโตมิเตอร์แบบพกพาขั้นสูงสำหรับการตรวจวัดทองแดงในน้ำ ช่วงต่ำ มิเตอร์นี้มีระบบออพติคอลที่เหนือกว่าซึ่งใช้ตัวตรวจจับอ้างอิงและตัวกรองสัญญาณรบกวนย่านความถี่แคบเพื่อการวัดที่รวดเร็วและทำซ้ำได้
- ไม่ต้องอุ่นเครื่องก่อนทำการวัด
- โหมดการสอนสำหรับคำแนะนำทีละขั้นตอน
- ตรวจสอบ CAL เพื่อตรวจสอบประสิทธิภาพของมิเตอร์
HI97747C is an advanced portable photometer for the measurement of copper in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable measurements.
- No warm up time before taking a measurement
- Tutorial mode for step-by-step instructions
- CAL Check to verify meter performance
Due to its malleability, thermal and electrical conductivity, and corrosion resistance, copper is used in a variety of industrial and technological applications. Copper may also be present in natural water and effluents due to widespread use to control biological growths in reservoirs and distribution pipes.
The HI97747C uses the bicinchoninate method to measure copper in water with concentrations of up to 1.500 mg/L (ppm). When the reagent is added to samples containing copper, the sample will turn a purple hue; the greater the concentration, the deeper the color. The associated color change is then colorimetrically analyzed according to the Beer-Lambert Law which states that light is absorbed by a complementary color, and the emitted radiation is dependent upon concentration.
For lower levels of copper, a narrow band interference filter at 575 nm allows only green-yellow light to be emitted and passed through the sample cuvette. As the change in color of the reacted sample increases, absorbance of the specific wavelength of light also increases, while transmittance decreases.
Manual : Download
Specification
| SKU | HI97747C |
| Product Name | Copper Low-Range Portable Photometer with CAL Check |
| Quote Required | Yes |
| Copper Range | 0.000 to 1.500 mg/L (as Cu2+) |
| Copper Resolution | 0.001 mg/L |
| Copper Accuracy | ±0.010 mg/L ±5% of reading at 25°C |
| Copper Method | adaptation of the EPA Method |
| Photometer/Colorimeter Light Source | LED with 575 nm bandpass filter |
| Photometer/Colorimeter Light Detector | silicon photocell |
| Bandpass Filter Bandwidth | 8 nm |
| Bandpass Filter Wavelength Accuracy | ±1.0 nm |
| Cuvette Type | round 24.6 mm diameter (22 mm inside) |
| GLP | yes |
| Display | 128 x 64 pixel B/W LCD with backlight |
| Logging Memory | 50 readings |
| Battery Type/Life | 1.5 V AA Alkaline (3 pcs.) / > 800 measurements (without backlight) |
| Automatic Shut-Off | after 15 minutes of inactivity (30 minutes before a READ measurement) |
| Environment | 0 to 50°C (32 to 122°F); 0 to 100% RH (IP67) |
| Weight | 380 g (13.4 oz.) |
| Dimensions | 142.5 x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0″) |
| Ordering Information | HI97747C is supplied with CAL Check standards, cuvettes (2), caps (2), plastic inserts for cuvette, (2), scissors, cuvette cleaning cloth, 1.5V AA batteries (3), instruction manual, and instrument quality certificate. |
Calibration Standard HI 701 Checker HC ®
HI705 Checker HC ® - Silica, LR
HI8410 Dissolved Oxygen Controller with 4 to 20mA
HI6074 - 7.400 pH@25°C - MQ - 500ml
HI5074 - 7.40 pH@25°C - TQ - 500ml
HI931002 4-20mA Amperometer, Simulator and Calibrator
Reagents for HI 701 (Free Chlorine), 25 Tests
HI6124 - 12.450 pH@25°C - MQ - 500ml
สารละลายสำหรับทำความสะอาดหัววัดค่ากรด-ด่าง (HI7061L)
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%
HI76302W Four ring Conductivity probe with internal temperature sensor
HI96770-11 CalCheck ™ Silica HR Calibration-Set
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI93711-01 Chlorine Total - Reagents - 100 Tests
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
HI6013 - 13.000 pH@25°C - MQ - 500ml
HI931001 pH and mV Precision Simulator (BNC)
HI3818 CTK Carbon Dioxide
HI93703-05 AMCO-AEPA-1 Calibration Solution at 500 FTU, 30 ml-Copy
HI766E2 K-Type, General Purpose w Cable
HI93102-0 AMCO-AEPA-1 Calibration Solution at 0 NTU, 30 ml
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 1.68 (HI5016) พร้อมใบรับรองต่อขวด
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711 

