Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI7022L - 470mV ORP Test Solution - 500ml
HI711 Checker HC ® - Total Chlorine
HI2008 - ORP Electrode for PCA
CTK Chlor Frei
HI4016-00 ISA for Sodium ISE, 500 ml Bottle
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
HI93701-01 Chlorine Free Reagents - 100 Tests
HI7609829-4 - Conductivity / Turbidity Sensor for HI9829 Multiparameter
HI2020 edge™ - pH Meter
HI76313 Platinum, four ring Conductivity/TDS probe
PCA 320 Online pH / Chlorine / °C - Analyzer / Controller
HI700 Checker HC ® - Ammonia, LR
HI1131P - Refillable, Combination pH Electrode for the Laboratory (BNC & Pin)
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI98312 DiST®6 EC/TDS/C°-Tester, (0.00-20.00 mS/cm - 0.00-10.00 g/l (ppt)) waterproof
เครื่องวัดอุณหภูมิอาหาร
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI736 Checker HC ® - Phosphorous, ULR
HI721 Checker HC ® - Iron
HI3002 - Submersion Conductivity Process Probe
HI93703-10 AMCO-AEPA-1 Calibration Solution at 10 FTU, 30 ml
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI93726-01 Nickel HR - Reagents- 100 Tests
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI38020 CTK Chlorine Free & Total
HI70080C - 800 mg/l (ppm) TDS@25°C Zert. - 25x20ml
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator - 1ppm to 5%