Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI70442L - 1500 mg/L (ppm) TDS @25°C - 500ml
HI7009L - 9.18 pH@25°C - SQ - 500ml
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
HI3190T -Redox Electrode Industry
HI70004C - 4.01 pH@25°C - SQ Zert. - 25x20ml
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
HI70032C - 1382 mg/l (ppm) TDS@25°C Cert. - 25x20ml
เครื่องวัดสีในน้ำตัวอย่าง HI727
HI740217 Lab Safety Shield for COD Measurement
HI7004L - 4.01 pH@25°C - SQ - 500ml
HI38000 CTK Sulfate
เครื่องควบคุมค่าความนำไฟฟ้า
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI700 Checker HC ® - Ammonia, LR
HI716 Checker HC ® - Bromine
HI70010P - 10.01 pH@25°C - SQ - 25x20ml
HI705 Checker HC ® - Silica, LR
HI736 Checker HC ® - Phosphorous, ULR
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI727 Checker HC ® - Color of Water
CTK Härte Gesamt
สารละลายมาตรฐานความขุ่น 20 NTU
HI70007P - 7.01 pH@25°C - SQ - 25x20ml
HI5012 - 12.00 pH@25°C - TQ - 500ml
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator - 1ppm to 5%