Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI98183 pH / ORP / °C Meter + PC Interface, Waterproof
CTK Chlor Frei
HI1131B - Combination pH Electrode
HI7078 Electrolyte solution 4 x 30 ml
HI11311 Digitale pH-Elektrode mit Matchin Pin, Glas, nachfüllbar (edge)
HI705 Checker HC ® - Silica, LR
PCA 310 Online Chlorine Analyzer & Controller
Calibration Standard HI 711 Checker HC ®
HI93750-01 Potassium - Reagents - 100 Tests
HI2003 - edge® Dedicated Conductivity/TDS/Salinity Meter
HI768L Pt100-Type, 4-Wire Air /Liquid
K-Typ 1-Kanal + Hand-Thermometer
FC100B - pH Elektrode
HI93757-01 Ozone - Reagents - 100 Tests
HI7030L - EC 12880 µS/cm@25°C - 500ml
HI70031C - EC 1413 µS/cm@25°C Zert. - 25x20ml
HI70038P - 6.44 g/l (ppt) TDS@25°C - 25x20ml
HI771 Checker HC ® - Chlorine, Ultra-High Range
HI70080C - 800 mg/l (ppm) TDS@25°C Zert. - 25x20ml
HI5004 - 4.01 pH@25°C - TQ - 500ml
BL983322-1 EC Mini Controller, 0 to 19.99 µS/cm, 230V
HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe
HI38020 CTK Chlorine Free & Total
HI10530 Digital pH-Electrode, Conical Tip, Glass, Refillable (edge)
PCA 320 Online pH / Chlorine / °C - Analyzer / Controller
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI758 Checker HC ® - MARINE Calcium
Reagents for HI 715 Checker HC ®, 25 Tests
HI98304 DiST®4 EC-Tester (up to 19.99 mS)
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
HI2111B - pH Half Cell (strong alkaline solution)
HI93720-01 Hardness Calcium - Reagents -100 Tests
FC220B - pH Elektrode
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI736 Checker HC ® - Phosphorous, ULR
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator - 1ppm to 5%