Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI96802 Fructose - Digital Refractometer Portable
HI3834 - CTK Iron Test Kit
HI5522 Research Grade pH/ORP/ISE and EC/TDS/Salinity/Resistivity Meter with CAL Check™
HI5421 Research Grade Dissolved Oxygen and BOD Meter
HI6091 - 9.177 pH@25°C - MQ - 500ml
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI96822 Seawater Analysis (Salinity) - Digital Refractometer Portable
HI200M 1L Magnetic stirrer with stainless steel cover plate, 230V
HI2111B - pH Half Cell (strong alkaline solution)
HI98129 COMBO Tester for pH/EC/TDS/C° up to 3999 µS, waterproof
HI7022L - 470mV ORP Test Solution - 500ml
HI98127 pH/°C-Tester (0.1 pH resolution) - waterproof
HI93754C-25 High Range COD Reagent (0 to 15000 mg/L)
HI5321 Research Grade EC/TDS/Salinity/Resistivity Meter with USP
PCA 320 Online pH / Chlorine / °C - Analyzer / Controller
HI727 Checker HC ® - Color of Water
BL983322-1 EC Mini Controller, 0 to 19.99 µS/cm, 230V
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%
HI3810-100 - Reagents for CTK Dissolved Oxygen
HI93721-01 Iron HR - Reagents -100 Tests
HI7091L - Reducing Pretreatment Solution, 500 ml
Reagents for HI 713 Checker HC ®, 25 Tests
HI70038P - 6.44 g/l (ppt) TDS@25°C - 25x20ml
HI98128 pH/°C-Tester (0.01 pH resolution) - waterproof
HI96801 Sucrose - Digital Refractometer Portable
HI93751-01 Sulfate - Reagents - 100 Tests
เครื่องวัดอุณหภูมิอาหาร
HI700 Checker HC ® - Ammonia, LR
HI768L Pt100-Type, 4-Wire Air /Liquid
HI701 Checker HC ® - Free Chlorine
HI1217D - Replacement pH Electrode
HI5002 - 2.00 pH@25°C - TQ - 500ml
BL983320-1 EC Mini Controller 0 to 199.9 µS/cm, 230V
HI96770-01 Silica HR - Reagents - 100 Tests
HI7010L - 10.01 pH@25°C - SQ - 500ml
HI2020 edge™ - pH Meter
HI7073L - Proteins - 500ml
HI3812 CTK Hardness Total
HI70080C - 800 mg/l (ppm) TDS@25°C Zert. - 25x20ml
BL1.5 Black Stone Dosing Pump 1.5lph 13 bar
BL983321-1 TDS Mini Controller 0.00 to 19.99 mg/L (ppm) - 230V