Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
 สารละลายสำหรับเก็บรักษาสภาพของหัววัดค่ากรด-ด่าง (HI70300L)
สารละลายสำหรับเก็บรักษาสภาพของหัววัดค่ากรด-ด่าง (HI70300L)						 HI3811-100 - Reagents for CTK Alkalinity
HI3811-100 - Reagents for CTK Alkalinity						 BL983315-1 TDS Mini Controller 0.0 to 199.9 mg/L (ppm) - 230V
BL983315-1 TDS Mini Controller 0.0 to 199.9 mg/L (ppm) - 230V						 HI70640L - RfE - Milch - 500ml
HI70640L - RfE - Milch - 500ml						 HI7006/1G - 6.86 pH@25°C - SQ - 3.78L
HI7006/1G - 6.86 pH@25°C - SQ - 3.78L						 เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701						 HI700 Checker HC ® - Ammonia, LR
HI700 Checker HC ® - Ammonia, LR						 อุปกรณ์ป้องกันความปลอดภัยจากสารเคมีกระเด็น (HI740217)
อุปกรณ์ป้องกันความปลอดภัยจากสารเคมีกระเด็น (HI740217)						 HI7033L - EC 84 µS/cm@25°C - 500ml
HI7033L - EC 84 µS/cm@25°C - 500ml						 HI766E1 K-Type, General Purpose w Cable
HI766E1 K-Type, General Purpose w Cable						 CTK Härte Gesamt
CTK Härte Gesamt						 HI38020 CTK Chlorine Free & Total
HI38020 CTK Chlorine Free & Total						 HI5007 - 7.01 pH@25°C - TQ - 500ml
HI5007 - 7.01 pH@25°C - TQ - 500ml						 HI93757-01 Ozone - Reagents - 100 Tests
HI93757-01 Ozone - Reagents - 100 Tests						 HI93735-02 Hardness Total (400 to 750 mg/L) - Reagents -100 Tests
HI93735-02 Hardness Total (400 to 750 mg/L) - Reagents -100 Tests						 HI766TR1 K-Type, Long Penetration Probe
HI766TR1 K-Type, Long Penetration Probe						 HI4010-00 TISAB II for Fluoride ISE, 500 ml Bottle
HI4010-00 TISAB II for Fluoride ISE, 500 ml Bottle						 HI93726-01 Nickel HR - Reagents- 100 Tests
HI93726-01 Nickel HR - Reagents- 100 Tests						 HI7074L - RfE - Anorganische Substanzen - 500ml
HI7074L - RfE - Anorganische Substanzen - 500ml						 HI4010-03 ISE 1000 mg/L (ppm) Fluoride Std , 500 ml Bottle
HI4010-03 ISE 1000 mg/L (ppm) Fluoride Std , 500 ml Bottle						 HI7074L - RfE - Anorganische Substanzen - 500ml
HI7074L - RfE - Anorganische Substanzen - 500ml						 HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%						 
				 
				 
				 
				 
				 
				 
				 
				