Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
สารละลายมาตรฐานสำหรับสอบเทียบความเค็ม แบบซอง HI70024P
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI38054 CTK Ozone
HI4016-02 ISE 100 mg/L (ppm) Sodium Std , 500 ml Bottle
เครื่องควบคุมค่าความนำไฟฟ้า
HI8410 Dissolved Oxygen Controller with 4 to 20mA
HI145-00 Thermometer (°C) with T-shaped (125mm)
HI4016-00 ISA for Sodium ISE, 500 ml Bottle
HI9124 pH / °C Meter, Waterproof Portable
HI4104 - Calcium ISE, Polymer membrane combination
HI740217 Lab Safety Shield for COD Measurement
HI98128 pH/°C-Tester (0.01 pH resolution) - waterproof
HI38020 CTK Chlorine Free & Total
HI2001 - ORP Electrode Process
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
HI766TR1 K-Type, Long Penetration Probe
HI11310 Digital pH-Electrode, Glass, refillable (edge)
HI7031L - EC 1413 µS/cm@25°C - 500ml
HI5002 - 2.00 pH@25°C - TQ - 500ml
HI3811 CTK Alkalinity
HI38040 CTK Iron Medium Range
HI717 Checker HC ® - Phosphate, HR
Reagents for HI 716 Checker HC ®, 25 Tests
HI7010L - 10.01 pH@25°C - SQ - 500ml
HI7039L - EC 5000 µS/cm@25°C - 500ml
HI7081L 30 g/L Na solution for Sodium ISE, 500 ml Bottle
เครื่องวัดปริมาณฟอสฟอรัส ช่วงสูง รุ่น HI706
HI38000-10 -Reagents for CTK Sulfate
HI708 Checker HC ® - Nitrite, HR
HI70004C - 4.01 pH@25°C - SQ Zert. - 25x20ml
HI38000 CTK Sulfate
เครื่องวัดอุณหภูมิอาหาร
HI98303 DiST®3 EC-Tester (up to 1999 µS)
HI98127 pH/°C-Tester (0.1 pH resolution) - waterproof
HI6007-01 - 7.010 pH@25°C - MQ - 1000ml
HI7061L - Electrode Cleaning Solution (General) - 500ml
HI931001 pH and mV Precision Simulator (BNC)
HI93102-0 AMCO-AEPA-1 Calibration Solution at 0 NTU, 30 ml
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
สารละลายมาตรฐานความขุ่น 20 NTU
HI7004L - 4.01 pH@25°C - SQ - 500ml
HI93501N FOODCARE Thermistor-Thermometer
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
สารละลายอิเล็กโทรไลต์ สำหรับหัววัดชนิดกัลวานิก (HI7042S)
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%