Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI7022L - 470mV ORP Test Solution - 500ml
Reagents for HI 715 Checker HC ®, 25 Tests
HI701 Checker HC ® - Free Chlorine
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
HI93703-05 AMCO-AEPA-1 Calibration Solution at 500 FTU, 30 ml-Copy
HI38058 CTK pH
HI5522 Research Grade pH/ORP/ISE and EC/TDS/Salinity/Resistivity Meter with CAL Check™
HI6010-01 - 10.010 pH@25°C - MQ - 1000ml
PCA 310 Online Chlorine Analyzer & Controller
HI2004 - edge® Dedicated Dissolved Oxygen Meter
HI96802 Fructose - Digital Refractometer Portable
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI1001 Industrial-pH-Electrode "Flow-thru" Monitoring, PVDF BNC, 3 m Cable
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
HI93739-01 Fluoride HR - Reagents - 100 Tests
Checker® Plus pH Tester
HI38020 CTK Chlorine Free & Total
HI3314 - Resistivity Probe for BL983314 Mini Controller
Reagents for HI 707 Checker HC ®, 25 Tests
HI723 Checker HC ® - Chromium VI, HR
HI93732-01 Dissolved Oxygen - Reagents - 100 Tests
HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode
BL983313-1 EC Mini Controller, 0 to 1999 µS/cm, 230V
HI758 Checker HC ® - MARINE Calcium
HI9812-5 Multiparameter pH/EC/TDS/°C - EC to1990 µS/cm
HI7662 Temperature Probe
Reagents for HI 713 Checker HC ®, 25 Tests
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%