Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
CTK Chlor Frei
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
HI701 Checker HC ® - Free Chlorine
HI93703-10 AMCO-AEPA-1 Calibration Solution at 10 FTU, 30 ml
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%
HI3818 CTK Carbon Dioxide
FC210B - pH Elektrode
HI98311 DiST®5 EC/TDS/C°-Tester, (0-3999 µS/cm - 0-2000 mg/l (ppm)) waterproof
HI38061 CTK Phosphate
HI758 Checker HC ® - MARINE Calcium
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
HI721 Checker HC ® - Iron
HI937520-01 Magnesium - Reagents -50 Tests
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI5321 Research Grade EC/TDS/Salinity/Resistivity Meter with USP
HI3811 CTK Alkalinity
HI1230B - Combination pH Electrode (General Purpose)
HI3190T -Redox Electrode Industry
HI7042S Refilling Solution for Galvanic Probe, 30ml
Reagents for HI 721 Checker HC ®, 25 Tests
HI93712-01 Aluminium - Reagents - 100 Tests
HI145-00 Thermometer (°C) with T-shaped (125mm)
BL931700-1 pH Mini Controller - 4 - 20mA output - 220V
HI1043B - pH Electrode for high temperature & strong acid
HI98302 DiST®2 TDS-Tester (up to 10.00 g/L)
HI98107 pHep pH -Tester (0.1 pH Resolution)
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI731318 - Cuvette Cleaning Cloth (4 pcs)
Reagents for HI 764 Checker HC ®, 25 Tests
HI739 Checker HC ® - Fluoride. HR
HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe
HI717 Checker HC ® - Phosphate, HR
HI710006 Power Adapter, 230 Vac to 12 VDC, European Plug
HI93732-01 Dissolved Oxygen - Reagents - 100 Tests
เครื่องวัดค่าเหล็ก รุ่น HI721
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI145-20 Thermometer (°C) with T-shaped (300mm)
HI98128 pH/°C-Tester (0.01 pH resolution) - waterproof