Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI766E2 K-Type, General Purpose w Cable
HI5002 - 2.00 pH@25°C - TQ - 500ml
HI3896-025 - Reagenzien für CTK Bodenanalysen
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
เครื่องควบคุมค่าความนำไฟฟ้า
HI93733-01 Ammonia HR - Reagents - 100 Tests
HI7077L - Oil and Fats - 500ml
HI739 Checker HC ® - Fluoride. HR
HI4110 - Fluoride ISE, Solid-state Combination
HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode
HI6013 - 13.000 pH@25°C - MQ - 500ml
สารเคมีสำหรับวัดค่าทองแดง ช่วงต่ำ HI95747-01 (100 Tests)
Reagents for HI 755 Checker HC ®, 25 Tests
HI93749-01 Chromium VI LR - Reagents - 100 Tests
HI6200405 - AmpHel Process ORP Electrode
HI1217D - Replacement pH Electrode
HI7072 Electrolyte Solution, 1M KNO³, 4 x 30 ml
HI7074L - RfE - Anorganische Substanzen - 500ml
Reagents for HI 733 Checker HC ®, 25 Tests
HI3822-100 - Reagents for CTK Sulfite
HI93712-01 Aluminium - Reagents - 100 Tests
ชุดทดสอบวัดค่าเหล็ก (HI3834)
Reagents for HI 716 Checker HC ®, 25 Tests
Reagents for HI 761 Checker HC ®, 25 Tests
HI70038P - 6.44 g/l (ppt) TDS@25°C - 25x20ml
HI7078 Electrolyte solution 4 x 30 ml
HI93719-01 Hardness Magnesium - Reagents -100 Tests
อุปกรณ์ป้องกันความปลอดภัยจากสารเคมีกระเด็น (HI740217)
ชุดเมมเบรน สำหรับวัดค่าไอออนคาร์บอนไดออกไซด์ จำนวน 3 ชิ้น (HI4005-53)
HI4014-00 ISA for Potassium ISE's
HI8733 EC Meter with Multi-Range 0.0 to 199.9 mS/cm ATC
HI716 Checker HC ® - Bromine
เครื่องวัดคุณภาพน้ำด้านสิ่งแวดล้อม แบบหลายพารามิเตอร์ รวมถึงค่า pH รุ่น HI83306-02
HI98185 pH / ORP / ISE / °C Meter + PC Interface, Waterproof
HI96711-11 CalCheck ™ Chlorine Total Calibration-Set
BL931700-1 pH Mini Controller - 4 - 20mA output - 220V
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%