Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI7090L ISA solution for Sodium ISE, 500 ml Bottle
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI4014-00 ISA for Potassium ISE's
HI3887 CTK pH & Free Chlorine
HI739 Checker HC ® - Fluoride. HR
HI7039L - EC 5000 µS/cm@25°C - 500ml
Calibration Standard HI 701 Checker HC ®
HI70032C - 1382 mg/l (ppm) TDS@25°C Cert. - 25x20ml
HI7073L - Proteins - 500ml
CTK Härte Gesamt
HI76409A/P DO Membrane for probe HI 76409 (5 pcs)
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
HI4014-00 ISA for Potassium ISE's
FC232D - Foodcare pH-Elektrode für HI 99161, DIN, 1 m Kabel (Fleisch)
HI8410 Dissolved Oxygen Controller with 4 to 20mA
HI700661P - RfE - Landwirtschaft - 25x20ml
HI3831T CTK Chlorine Total
HI716 Checker HC ® - Bromine
HI9812-5 Multiparameter pH/EC/TDS/°C - EC to1990 µS/cm
HI731331 - Glass Cuvette 4 pcs. - Serie HI967xx & HI93414 & HI98703
HI7006L - 6.86 pH@25°C - SQ - 500ml
HI1297D - pH/ORP-Electrode
HI93709-01 Manganese HR - Reagentst - 100 Tests
HI98304 DiST®4 EC-Tester (up to 19.99 mS)
HI4004-01 ISE 0.1M Calcium Std , 500 ml Bottle
HI4013-06 Nitrate Interferent Suppressant ISA, 500 ml Bottle
น้ำยามาตรฐานสอบเทียบ
HI2001 - ORP Electrode Process
HI38000 CTK Sulfate
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
HI93751-01 Sulfate - Reagents - 100 Tests
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI77400P - 7.01+ 4.01 pH@25°C - SQ - Sachets 5x20ml COMBO
HI7009L - 9.18 pH@25°C - SQ - 500ml
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%