Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI9828-25 - Quick Calibration Solution, 500 mL
HI70007C - 7.01 pH@25°C - SQ Zert. - 25x20ml
ชุดทดสอบแอมโมเนีย สำหรับน้ำจืด (HI3824)
HI98129 COMBO Tester for pH/EC/TDS/C° up to 3999 µS, waterproof
HI8410 Dissolved Oxygen Controller with 4 to 20mA
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI93720-01 Hardness Calcium - Reagents -100 Tests
สารละลายสำหรับเก็บรักษาสภาพของหัววัดค่ากรด-ด่าง (HI70300L)
Reagents for HI 733 Checker HC ®, 25 Tests
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
CTK Chrom VI
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
สารละลายมาตรฐานความขุ่น 20 NTU
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
น้ำยามาตรฐานสอบเทียบ
HI717 Checker HC ® - Phosphate, HR
HI768L Pt100-Type, 4-Wire Air /Liquid
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
สารละลายอิเล็กโทรไลต์สำหรับเติมหัววัดค่ากรด-ด่าง (HI7082L)
HI7009L - 9.18 pH@25°C - SQ - 500ml
HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI7091L - Reducing Pretreatment Solution, 500 ml
HI7036L - 12.41 g/L (ppt) TDS @25°C - 500ml
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
HI708 Checker HC ® - Nitrite, HR
HI3831T CTK Chlorine Total
HI7071 Electrolyte Solution 3.5 M KCl + AgCl, 4 x 30 ml
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI93735-00 Hardness Total (0 to 250 mg/L) - Reagents -100 Tests
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%