Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI6100405 - AmpHel Flat Tip Process pH Electrode
HI93732-01 Dissolved Oxygen - Reagents - 100 Tests
น้ำยามาตรฐานสอบเทียบ
BL983315-1 TDS Mini Controller 0.0 to 199.9 mg/L (ppm) - 230V
HI93703-05 AMCO-AEPA-1 Calibration Solution at 500 FTU, 30 ml-Copy
HI3818 CTK Carbon Dioxide
HI7042S Refilling Solution for Galvanic Probe, 30ml
HI70670L - RfE - Salzablagerungen - 500ml
HI991301 Multiparameter pH/EC/TDS/°C - EC to 20.00 mS
Reagents for HI 707 Checker HC ®, 25 Tests
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI740224 - 170 ml plastic beaker (6 pcs)
HI70004C - 4.01 pH@25°C - SQ Zert. - 25x20ml
Chlorine Removal
HI764 Checker HC ® - Nitrite, ULR
BL983317-1 EC Mini Controller upto 10.00 mS/cm, 230V
HI98509 Checktemp® 1C - Pocket-Thermometer (Penetration)
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
Reagents for HI 755 Checker HC ®, 25 Tests
HI98309 UPW - Ultra Pure Water Tester - Conductivity (up to 1.999 µS/cm)
HI147-00 Thermometer Checkfridge™ (°C)
HI758 Checker HC ® - MARINE Calcium
Reagents for HI 701 (Free Chlorine), 25 Tests
Reagents for HI 723 Checker HC ®, 25 Tests
HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI93729-01 Fluoride LR - Reagents - 100 Tests
HI736 Checker HC ® - Phosphorous, ULR
HI98120 ORP/°C-Tester, waterproof
HI98501 Checktemp® Thermometer (°C)
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI731331 - Glass Cuvette 4 pcs. - Serie HI967xx & HI93414 & HI98703
HI98107 pHep pH -Tester (0.1 pH Resolution)
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%