Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI1230B - Combination pH Electrode (General Purpose)
Calibration Standard HI 755 Checker HC ®
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI3864 CTK Phenol
HI38020 CTK Chlorine Free & Total
HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI38058 CTK pH
Reagents for HI 736 Checker HC ®, 25 Tests
HI4016-03 ISE 1000 mg/L (ppm) Sodium Std , 500 ml Bottle
HI7031L - EC 1413 µS/cm@25°C - 500ml
HI98185 pH / ORP / ISE / °C Meter + PC Interface, Waterproof
HI3822 CTK Sulfite
HI96770-01 Silica HR - Reagents - 100 Tests
HI1143B - Electrode (Fluoride Application)
HI3833-050 - Reagents for CTK Phosphate
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI3002 - Submersion Conductivity Process Probe
HI7006L - 6.86 pH@25°C - SQ - 500ml
HI733 Checker HC ® - Ammonia, HR
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
HI76409A/P DO Membrane for probe HI 76409 (5 pcs)
หัววัดค่าการนำไฟฟ้า/ของแข็งละลายในน้ำ แบบ Four ring รุ่น HI76306 รวมหัววัดอุณหภูมิในตัว
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI755-26
HI38000 CTK Sulfate
HI8710 pH analog Controller with Self Diagnostic
FC220B - pH Elektrode
HI7635 - Industrial Conductivity Probe
HI7035L - EC 111800 µS/cm@25°C - 500ml
HI11310 Digital pH-Electrode, Glass, refillable (edge)
HI93706-01 Phosphorous - Reagents - 100 Tests
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 1.68 (HI5016) พร้อมใบรับรองต่อขวด
สารละลายอิเล็กโทรไลต์ สำหรับหัววัดชนิดกัลวานิก (HI7042S)
H3895 CTK Agriculture, Basic
HI7078 Electrolyte solution 4 x 30 ml
HI1292D - pH Electrode (Soil)
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator - 1ppm to 5%