Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Automatic Titrators
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI7030L - EC 12880 µS/cm@25°C - 500ml
HI8410 Dissolved Oxygen Controller with 4 to 20mA
HI700661P - RfE - Landwirtschaft - 25x20ml
HI70009P - 9.18 pH@25°C - SQ - 25x20ml
HI920005 i-Button® tags (tag identification system) (5 pcs)
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
HI93757-01 Ozone - Reagents - 100 Tests
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
สารละลายมาตรฐานสำหรับสอบเทียบความเค็ม แบบซอง HI70024P
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator - 1ppm to 5%
HI4016-03 ISE 1000 mg/L (ppm) Sodium Std , 500 ml Bottle
HI5009 - 9.00 pH@25°C - TQ - 500ml
HI4004-01 ISE 0.1M Calcium Std , 500 ml Bottle
Reagents for HI 755 Checker HC ®, 25 Tests
น้ำยามาตรฐานสอบเทียบ
HI3833 CTK Phosphate
HI93738-01 Chlorine Dioxide - Reagents-Kit - 100 Tests
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
HI731335 - Cap for Cuvette 4 pcs. - Serie HI967xx
HI3818 CTK Carbon Dioxide
HI705 Checker HC ® - Silica, LR
HI93714-01 Cyanide - Reagents - 100 Tests
HI1217D - Replacement pH Electrode
HI93713-01 Phosphate LR - Reagents - 100 Tests
HI7010L - 10.01 pH@25°C - SQ - 500ml
HI93712-01 Aluminium - Reagents - 100 Tests
HI7006L - 6.86 pH@25°C - SQ - 500ml
HI70442L - 1500 mg/L (ppm) TDS @25°C - 500ml
HI95771-01 Chlorine HR - Reagents-Kit - 100 Tests
HI3844 CTK Hydrogen Peroxide
HI98501 Checktemp® Thermometer (°C)
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI710006 Power Adapter, 230 Vac to 12 VDC, European Plug
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm