Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
เครื่องวัดค่าเหล็ก รุ่น HI721
HI4016-00 ISA for Sodium ISE, 500 ml Bottle
HI76405 Electrode Holder with Steel Base
HI93714-01 Cyanide - Reagents - 100 Tests
Reagents for HI 717 Checker HC ®, 40 Tests
HI3831T CTK Chlorine Total
HI5001 - 1.00 pH@25°C - TQ - 500ml
HI761 Checker HC ® - Total Chlorine, ULR
HI4104 - Calcium ISE, Polymer membrane combination
HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI93706-01 Phosphorous - Reagents - 100 Tests
HI93709-01 Manganese HR - Reagentst - 100 Tests
HI7007L - 7.01 pH@25°C - SQ - 500ml
เครื่องควบคุมค่าความนำไฟฟ้า
HI7078 Electrolyte solution 4 x 30 ml
BL981411-1 pH Mini Controller (Res 0.1pH) - 220V
HI4016-02 ISE 100 mg/L (ppm) Sodium Std , 500 ml Bottle
HI70442L - 1500 mg/L (ppm) TDS @25°C - 500ml
HI93750-01 Potassium - Reagents - 100 Tests
HI4014-00 ISA for Potassium ISE's
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI1297D - pH/ORP-Electrode
HI7030L - EC 12880 µS/cm@25°C - 500ml
สารละลายอิเล็กโทรไลต์สำหรับเติมหัววัดค่ากรด-ด่าง (HI7082)
สารละลายมาตรฐานความขุ่น 20 NTU
HI7091L - Reducing Pretreatment Solution, 500 ml
HI7001L - 1.68 pH@25°C - SQ - 500ml
HI708 Checker HC ® - Nitrite, HR
HI98304 DiST®4 EC-Tester (up to 19.99 mS)
Reagents for HI 723 Checker HC ®, 25 Tests
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI6007-01 - 7.010 pH@25°C - MQ - 1000ml
HI38040 CTK Iron Medium Range
HI4001-51 Ammonia Membrane Kit
HI1053B - pH Electrode for semi solid samples or low conductivity solutions
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI1043B - pH Electrode for high temperature & strong acid
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm