Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
 HI7091L - Reducing Pretreatment Solution, 500 ml
HI7091L - Reducing Pretreatment Solution, 500 ml						 สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 1.68 (HI5016) พร้อมใบรับรองต่อขวด
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 1.68 (HI5016) พร้อมใบรับรองต่อขวด						 HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml						 HI3887 CTK pH & Free Chlorine
HI3887 CTK pH & Free Chlorine						 HI95771-01 Chlorine HR - Reagents-Kit - 100 Tests
HI95771-01 Chlorine HR - Reagents-Kit - 100 Tests						 HI5016 - 1.68 pH@25°C - TQ - 500ml
HI5016 - 1.68 pH@25°C - TQ - 500ml						 HI7039L - EC 5000 µS/cm@25°C - 500ml
HI7039L - EC 5000 µS/cm@25°C - 500ml						 HI93710-01 pH photometric - Reagents- 100 Tests
HI93710-01 pH photometric - Reagents- 100 Tests						 HI3811-100 - Reagents for CTK Alkalinity
HI3811-100 - Reagents for CTK Alkalinity						 HI70630L - RfE - Fleisch - 500ml
HI70630L - RfE - Fleisch - 500ml						 สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01  (HI7007/1L)
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01  (HI7007/1L)						 HI920005 i-Button® tags (tag identification system) (5 pcs)
HI920005 i-Button® tags (tag identification system) (5 pcs)						 HI10430 Digital pH-Electrode, High-Temperature-Glass, Refillble (edge)
HI10430 Digital pH-Electrode, High-Temperature-Glass, Refillble (edge)						 HI145-00 Thermometer (°C) with T-shaped (125mm)
HI145-00 Thermometer (°C) with T-shaped (125mm)						 HI731325W - Cap for Cuvette 4 pcs. - Serie HI832xx
HI731325W - Cap for Cuvette 4 pcs. - Serie HI832xx						 HI6013 - 13.000 pH@25°C - MQ - 500ml
HI6013 - 13.000 pH@25°C - MQ - 500ml						 สารเคมีวัดค่าไนเตรต HI782-25 ยี่ห้อ HANNA สำหรับวัดน้ำในตู้เลี้ยงปลาทะเล
สารเคมีวัดค่าไนเตรต HI782-25 ยี่ห้อ HANNA สำหรับวัดน้ำในตู้เลี้ยงปลาทะเล						 HI4010-00 TISAB II for Fluoride ISE, 500 ml Bottle
HI4010-00 TISAB II for Fluoride ISE, 500 ml Bottle						 HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm						 
				 
				 
				 
				 
				 
				 
				 
				