Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI4007-02 ISE 100 mg/L (ppm) Chloride Std , 500 ml Bottle
HI731318 - Cuvette Cleaning Cloth (4 pcs)
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI766Z7 K-Type, Wire Temperature Probe (7m)
HI726 Checker HC ® - Nickel, HR
HI3815 CTK Chloride
HI76407A/P DO Membrane for probe HI 76407 (5 pcss)
HI4014-01 0.1 M Potassium Standard
HI7033L - EC 84 µS/cm@25°C - 500ml
HI931001 pH and mV Precision Simulator (BNC)
Reagents for HI 758 Checker HC ®, 25 Tests
HI700 Checker HC ® - Ammonia, LR
HI70031P - EC 1413 µS/cm@25°C - 25x20ml
HI5012 - 12.00 pH@25°C - TQ - 500ml
ชุดเมมเบรน สำหรับวัดค่าไอออนคาร์บอนไดออกไซด์ จำนวน 3 ชิ้น (HI4005-53)
HI5412 - Reference Electrode, Banana
HI3815-100 - Reagents for CTK Chloride
HI93701-01 Chlorine Free Reagents - 100 Tests
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI11311 พร้อม Matching pin ใช้งานสำหรับตัวอย่างทั่วไป
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI6011 - 11.000 pH@25°C - MQ - 500ml
HI93738-01 Chlorine Dioxide - Reagents-Kit - 100 Tests
HI3873 CTK Nitrite
HI145-20 Thermometer (°C) with T-shaped (300mm)
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
HI98312 DiST®6 EC/TDS/C°-Tester, (0.00-20.00 mS/cm - 0.00-10.00 g/l (ppt)) waterproof
HI76306 EC/TDS probe with internal temperature sensor
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI95771-01 Chlorine HR - Reagents-Kit - 100 Tests
สารเคมีสำหรับวัดค่าทองแดง ช่วงต่ำ HI95747-01 (100 Tests)
HI4016-00 ISA for Sodium ISE, 500 ml Bottle
HI98301 DiST®1 TDS-Tester (up to 1999 ppm)
Reagents for HI 711 (Total Chlorine) Checker HC ® (Total), 25 Tests
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
HI98303 DiST®3 EC-Tester (up to 1999 µS)
HI7072 Electrolyte Solution, 1M KNO³, 4 x 30 ml
HI93739-01 Fluoride HR - Reagents - 100 Tests
Reagents for HI 726 Checker HC ®, 25 Tests
HI4013-01 ISE 0.1M Nitrate Std , 500 ml Bottle
HI8314 pH/mV/°C Meter- DIN type - custom calibration
HI70038C - 6.44 g/l (ppt) TDS@25°C Zert. - 25x20ml
Reagents for HI 736 Checker HC ®, 25 Tests
HI8936CN EC - Transmitter - 0 to 1999 µS/cm