Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
 HI70670L - RfE - Salzablagerungen - 500ml
HI70670L - RfE - Salzablagerungen - 500ml						 เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711						 HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode
HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode						 HI708 Checker HC ® - Nitrite, HR
HI708 Checker HC ® - Nitrite, HR						 HI70442P - 1500 mg/l (ppm) TDS@25°C - 25x20ml
HI70442P - 1500 mg/l (ppm) TDS@25°C - 25x20ml						 HI93701-01 Chlorine Free Reagents - 100 Tests
HI93701-01 Chlorine Free Reagents - 100 Tests						 HI4007-02 ISE 100 mg/L (ppm) Chloride Std , 500 ml Bottle
HI4007-02 ISE 100 mg/L (ppm) Chloride Std , 500 ml Bottle						 HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI93719-01 Hardness Magnesium - Reagents -100 Tests						 HI3834-050 - Reagents for CTK Iron
HI3834-050 - Reagents for CTK Iron						 สารละลายมาตรฐาน แบบรวดเร็ว (HI9828-25)
สารละลายมาตรฐาน แบบรวดเร็ว (HI9828-25)						 HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI98121 COMBO pH/ORP/°C-Tester, waterproof						 HI3834-050 - Reagents for CTK Iron
HI3834-050 - Reagents for CTK Iron						 อุปกรณ์ป้องกันความปลอดภัยจากสารเคมีกระเด็น (HI740217)
อุปกรณ์ป้องกันความปลอดภัยจากสารเคมีกระเด็น (HI740217)						 HI4014-01 0.1 M Potassium Standard
HI4014-01 0.1 M Potassium Standard						 HI3829 Free Chlorine
HI3829 Free Chlorine						 HI98301 DiST®1 TDS-Tester (up to 1999 ppm)
HI98301 DiST®1 TDS-Tester (up to 1999 ppm)						 HI8936CN EC - Transmitter - 0 to 1999 µS/cm
HI8936CN EC - Transmitter - 0 to 1999 µS/cm						 
				 
				 
				 
				 
				 
				 
				 
				