Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI70442L - 1500 mg/L (ppm) TDS @25°C - 500ml
HI6011 - 11.000 pH@25°C - MQ - 500ml
HI8936CN EC - Transmitter - 0 to 1999 µS/cm
สารละลายมาตรฐานความขุ่น 20 NTU
HI93704-01 Hydrazine - Reagents - 100 Tests
HI5001 - 1.00 pH@25°C - TQ - 500ml
BL983329-1 TDS Mini Controller 0.0 to 999 mg/L (ppm) - 230V
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI3833 CTK Phosphate
HI96729-11 CalCheck ™ Fluoride LR Calibration-Set
เครื่องวัดปริมาณฟอสฟอรัส ช่วงสูง รุ่น HI706
หัววัดค่ากรด-ด่าง รุ่น HI1296D
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
HI726 Checker HC ® - Nickel, HR
HI6010 - 10.010 pH@25°C - MQ - 500ml
สารละลายมาตรฐานสำหรับสอบเทียบ AMCO-AEPA-1/500 FTU รหัส HI93703-05
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
สารเคมีสำหรับวัดค่าแคลเซียม HI937521-01 (50 Tests)
เครื่องวัดความเค็ม แบบภาคสนาม รุ่น HI96821
Reagents for HI 707 Checker HC ®, 25 Tests
HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
HI766F K-Type, High Temperature Probe
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
HI5004 - 4.01 pH@25°C - TQ - 500ml
HI93722-01 Cyanuric Acid - Reagents - 100 Tests
HI717 Checker HC ® - Phosphate, HR
สารละลายมาตรฐานสำหรับสอบเทียบ AMCO-AEPA-1/0 NTU รหัส HI93102-0
HI6004 - 4.010 pH@25°C - MQ - 500ml
HI981402 pH-Indicator with LED-Alarm & Electrode PRONTO
สารละลายมาตรฐานโซเดียม 3 g/L (HI7083L)
HI731321 - Glass Cuvette 4 pcs. - Photometer Series HI 937xx, HI 832xx und HI 7xx
หัววัดอุณหภูมิ รุ่น HI7662
HI6007-01 - 7.010 pH@25°C - MQ - 1000ml
HI98301 DiST®1 TDS-Tester (up to 1999 ppm)
HI7032L - 1382 mg/L (ppm) TDS @25°C - 500ml
น้ำยามาตรฐานสอบเทียบ
HI3810-100 - Reagents for CTK Dissolved Oxygen
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
HI8936CN EC - Transmitter - 0 to 1999 µS/cm