Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI770 Checker HC ® - Silica, HR
HI77400P - 7.01+ 4.01 pH@25°C - SQ - Sachets 5x20ml COMBO
ชั้นวางหลอดทดลองระบายความร้อนทำจากสแตนเลสสตีล (HI740216)
สารละลายมาตรฐานสำหรับสอบเทียบ AMCO-AEPA-1/20 NTU รหัส HI93102-20
HI3811-100 - Reagents for CTK Alkalinity
HI7039L - EC 5000 µS/cm@25°C - 500ml
HI98304 DiST®4 EC-Tester (up to 19.99 mS)
HI98127 pH/°C-Tester (0.1 pH resolution) - waterproof
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
เครื่องวัดความหวาน (น้ำตาลฟรุกโตส) แบบภาคสนาม รุ่น HI96802
HI93710-01 pH photometric - Reagents- 100 Tests
สารละลาย ISA สำหรับวัดค่าไอออนโซเดียม (HI7090L)
HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI7033L - EC 84 µS/cm@25°C - 500ml
เครื่องวัดปริมาณอัลคาไลนิตี้ (dKH) ในน้ำทะเล รุ่น HI772
น้ำยาสำหรับสอบเทียบเครื่องวัดออกซิเจน 0% หรือ 0 mg/L (HI7040L)
เครื่องวัดคุณภาพน้ำ รุ่น HI5222 (pH/ISE/ORP พร้อมโหมด CAL Check™)
HI93728-01 Nitrate - Reagents - 100 Tests
HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI93706-01 Phosphorous - Reagents - 100 Tests
HI99301 EC / TDS / °C Meter upto 20 mS
HI3834-050 - Reagents for CTK Iron
HI7006/1G - 6.86 pH@25°C - SQ - 3.78L
Reagents for HI 711 (Total Chlorine) Checker HC ® (Total), 25 Tests
HI93711-01 Chlorine Total - Reagents - 100 Tests
HI761 Checker HC ® - Total Chlorine, ULR
HI3833-050 - Reagents for CTK Phosphate
HI5013 - 13.00 pH@25°C - TQ - 500ml
Reagents for HI 755 Checker HC ®, 25 Tests
HI6200405 - AmpHel Process ORP Electrode
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI3896-025 - Reagenzien für CTK Bodenanalysen
HI93729-01 Fluoride LR - Reagents - 100 Tests
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
HI766F K-Type, High Temperature Probe
HI8936CN EC - Transmitter - 0 to 1999 µS/cm