Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณฟอสฟอรัส ช่วงสูง รุ่น HI706
สารเคมีสำหรับวัดค่าคลอรีนอิสระ ช่วงต่ำมาก HI95762-01 (100 Tests)
สารเคมีสำหรับวัดค่าคลอไรด์ HI93753-01 (100 Tests)
HI93708-01 Nitrite HR - Reagents - 100 Tests
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI2111B - pH Half Cell (strong alkaline solution)
HI70030P - EC 12880 µS/cm@25°C - 25x20ml
HI70031C - EC 1413 µS/cm@25°C Zert. - 25x20ml
HI93719-01 Hardness Magnesium - Reagents -100 Tests
เครื่องวัดค่าเหล็ก รุ่น HI721
HI3896 CTK Agriculture Test Kit, Professional
HI93722-01 Cyanuric Acid - Reagents - 100 Tests
HI8614LN pH - Transmitter with LCD, 4 to 20 mA Ouput
HI731319 Micro Stir Bars for Magnetic Stirrers
HI70681L - Ink Stains - 500ml
HI4007-02 ISE 100 mg/L (ppm) Chloride Std , 500 ml Bottle
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI11311 พร้อม Matching pin ใช้งานสำหรับตัวอย่างทั่วไป
เครื่องวัดคุณภาพน้ำ แบบหลายพารามิเตอร์ รุ่น HI2020 edge™
HI98303 DiST®3 EC-Tester (up to 1999 µS)
HI8410 Dissolved Oxygen Controller with 4 to 20mA
น้ำยามาตรฐานสอบเทียบ
หัววัดค่ากรด-ด่าง รุ่น HI1296D
Reagents for HI 717 Checker HC ®, 40 Tests
HI931001 pH and mV Precision Simulator (BNC)
HI3822-100 - Reagents for CTK Sulfite
HI7032L - 1382 mg/L (ppm) TDS @25°C - 500ml
สารละลายมาตรฐาน แบบรวดเร็ว (HI9828-25)
เครื่องวัดค่า EC/Temp แบบพกพาสะดวก รุ่น HI98318
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01 (HI7007/1L)
Reagents for HI 749 Checker HC ®, 25 Tests
HI93748-01 Manganese LR - Reagents - 50 Tests
HI38001 CTK Sulfate Low and High Range
HI5006 - 6.00 pH@25°C - TQ - 500ml
HI713 Checker HC ® - Phosphate, LR
HI93723-01 Chromium VI HR - Reagents - 100 Tests
เครื่องวัดค่ากรด-ด่าง แบบตั้งโต๊ะ รุ่น HI5221 (pH/ORPพร้อมโหมด CAL Check™)
HI7074L - RfE - Anorganische Substanzen - 500ml
HI70038P - 6.44 g/l (ppt) TDS@25°C - 25x20ml
Reagents for HI 764 Checker HC ®, 25 Tests
H300N 2.5L Heavy Duty Magnetic Stirrer
HI8936CN EC - Transmitter - 0 to 1999 µS/cm