Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
เครื่องวัดค่า pH/EC/TDS/Temp แบบพกพาสะดวก รุ่น HI98131
HI98501 Checktemp® Thermometer (°C)
HI98120 ORP/°C-Tester, waterproof
HI7072 Electrolyte Solution, 1M KNO³, 4 x 30 ml
HI3864 CTK Phenol
HI3847 CTK Copper
สารละลายมาตรฐาน แบบรวดเร็ว (HI9828-25)
HI96735-11 CalCheck ™ Hardness LR / MR / HR Calibration-Set
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
เครื่องวัดค่า pH แบบพกพาสะดวก รุ่น HI98115
สารละลายมาตรฐานสำหรับสอบเทียบ AMCO-AEPA-1/0 FTU รหัส HI93703-0
HI98129 COMBO Tester for pH/EC/TDS/C° up to 3999 µS, waterproof
HI6007-01 - 7.010 pH@25°C - MQ - 1000ml
HI8936CN EC - Transmitter - 0 to 1999 µS/cm
HI5412 - Reference Electrode, Banana
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI10430 ใช้งานสำหรับไฮโดรคาร์บอน/ตัวทำละลาย
Reagents for HI 700 Checker HC ®, 25 Tests
HI7033L - EC 84 µS/cm@25°C - 500ml
HI4013-00 ISA for Nitrate ISE, 500 ml Bottle3
HI38054 CTK Ozone
Reagents for HI 749 Checker HC ®, 25 Tests
HI93739-01 Fluoride HR - Reagents - 100 Tests
HI9147-04 Dissolved Oxygen / °C - Meter, Galvanic DO Probe
HI5009 - 9.00 pH@25°C - TQ - 500ml
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
HI70642L - Cheese - 500ml
HI77400P - 7.01+ 4.01 pH@25°C - SQ - Sachets 5x20ml COMBO
สารเคมีสำหรับวัดค่าคลอรีนรวม (HI93711-01)
HI3815-100 - Reagents for CTK Chloride
เครื่องควบคุมค่าความนำไฟฟ้า
HI3834-050 - Reagents for CTK Iron
สารเคมีสำหรับวัดค่าคลอรีนรวม ช่วงสูง HI95771-01 (100 Tests)
HI731319 Micro Stir Bars for Magnetic Stirrers
เครื่องวัดค่า pH/EC/TDS/Temp สำหรับไฮโดรโปนิกส์ รุ่น HI9814
หัววัดสำรองเครื่องวัดความเป็นกรด-ด่าง แบบพกพาสะดวก รุ่น HI73127
HI7031L - EC 1413 µS/cm@25°C - 500ml
Reagents for HI 758 Checker HC ®, 25 Tests
HI708 Checker HC ® - Nitrite, HR
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI3887 CTK pH & Free Chlorine
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI3826 CTK Ammonia Salt Water