Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI766F K-Type, High Temperature Probe
น้ำยามาตรฐานสอบเทียบ
HI766E2 K-Type, General Purpose w Cable
HI2020 edge™ - pH Meter
HI70004P - 4.01 pH@25°C - SQ - 25x20ml
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 9.18 (HI7009/1G)
HI93715-01 Ammonia MR - Reagents - 100 Tests
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01 (HI7007/1L)
HI96735-11 CalCheck ™ Hardness LR / MR / HR Calibration-Set
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 4.01 (HI7004/1L)
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 6.86 (HI7006/1L)
เครื่องควบคุมค่าความนำไฟฟ้า
HI766TR1 K-Type, Long Penetration Probe
สารเคมีสำหรับวัดค่าแคลเซียม HI937521-01 (50 Tests)
HI766E1 K-Type, General Purpose w Cable
HI7609829-2 - Dissolved Oxygen Sensor for HI9829 Multiparameter
HI70031C - EC 1413 µS/cm@25°C Zert. - 25x20ml
HI70663L - Soil Deposit - 500ml
HI766Z7 K-Type, Wire Temperature Probe (7m)
สารเคมีสำหรับวัดค่าซิลิกา ช่วงสูง (HI96770-01)
สารละลายมาตรฐานสำหรับสอบเทียบสำหรับเครื่องรุ่น HI97735 (HI96735-11)
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI12300 ใช้งานสำหรับภาคสนาม
หลอดแก้ว จำนวน 4 ชิ้น (HI731331) ใช้งานกับเครื่องรุ่น HI977XX & HI93414 & HI98703
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
หัววัดค่ากรด-ด่าง รุ่น HI1296D
HI727 Checker HC ® - Color of Water
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01 (HI7007/1G)
สารเคมีสำหรับวัดค่าคลอไรด์ HI93753-01 (100 Tests)
สารละลายมาตรฐานโซเดียม 30 g/L (HI7081L)
สารเคมีสำหรับวัดค่าคลอรีนอิสระ ช่วงต่ำมาก HI95762-01 (100 Tests)
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
HI93709-01 Manganese HR - Reagentst - 100 Tests
HI70010C - 10.01 pH@25°C - SQ Zert. - 25x20ml
สารละลายมาตรฐานสำหรับสอบเทียบค่าการนำไฟฟ้า 1413 µS/cm (HI7031/1G)
BL983322-1 EC Mini Controller, 0 to 19.99 µS/cm, 230V
HI70038C - 6.44 g/l (ppt) TDS@25°C Zert. - 25x20ml
สารเคมีสำหรับวัดค่าคลอรีนรวม ช่วงสูง HI95771-01 (100 Tests)
HI7091L - Reducing Pretreatment Solution, 500 ml
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 7.01 (HI5007) พร้อมใบรับรองต่อขวด
HI4001-00 ISA Alkaline for Ammonia & Cyanide ISE, 500 ml Bottle
HI70009C - 9.18 pH@25°C - SQ Zert. - 25x20ml
HI731335 - Cap for Cuvette 4 pcs. - Serie HI967xx
HI7032L - 1382 mg/L (ppm) TDS @25°C - 500ml
HI98301 DiST®1 TDS-Tester (up to 1999 ppm)
HI3896 CTK Agriculture Test Kit, Professional
BL983320-1 EC Mini Controller 0 to 199.9 µS/cm, 230V
HI5002 - 2.00 pH@25°C - TQ - 500ml
HI2111B - pH Half Cell (strong alkaline solution)
HI93707-01 Nitrite LR - Reagents - 100 Tests
HI3815-100 - Reagents for CTK Chloride
HI1297D - pH/ORP-Electrode
HI4014-00 ISA for Potassium ISE's
HI3842 CTK Hardness
HI8936CN EC - Transmitter - 0 to 1999 µS/cm