Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
HI70080P - 800 mg/l (ppm) TDS@25°C - 25x20ml
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI70038P - 6.44 g/l (ppt) TDS@25°C - 25x20ml
HI93733-01 Ammonia HR - Reagents - 100 Tests
HI93709-01 Manganese HR - Reagentst - 100 Tests
HI5011 - 11.00 pH@25°C - TQ - 500ml
HI96821 Sodium Chloride - Digital Refractometer Portable
HI7609829-2 - Dissolved Oxygen Sensor for HI9829 Multiparameter
HI70009C - 9.18 pH@25°C - SQ Zert. - 25x20ml
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง 6.86 (HI7006/1L)
HI70670L - RfE - Salzablagerungen - 500ml
สารละลายมาตรฐานสำหรับสอบเทียบค่าการนำไฟฟ้า 1413 µS/cm (HI7031/1G)
เครื่องวัดสีในน้ำตัวอย่าง HI727
HI9124 pH / °C Meter, Waterproof Portable
HI7639 - Inline Conductivity Probes with Platium Ring with PT100 sensor
HI93735-00 Hardness Total (0 to 250 mg/L) - Reagents -100 Tests
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI1143B - Electrode (Fluoride Application)
ชุดเมมเบรน สำหรับวัดค่าไอออนแอมโมเนีย (HI4001-51)
เครื่องควบคุมค่าความนำไฟฟ้า
หัววัดค่าการนำไฟฟ้า แบบ Four ring รุ่น HI76301D
HI3812 CTK Hardness Total
HI8936CN EC - Transmitter - 0 to 1999 µS/cm