HI 9828-25 is a quick calibration solution to be used with HI 9828 and HI 9829 series multiparameter meter sensors.
Order Information:
500 mL Bottle
HI7039L - EC 5000 µS/cm@25°C - 500ml
1 × ฿963.00
HI7031L - EC 1413 µS/cm@25°C - 500ml
2 × ฿963.00
HI715 Checker HC ® - Ammonia, MR
1 × ฿3,103.00
HI5011 - 11.00 pH@25°C - TQ - 500ml
1 × ฿1,658.50
HI7609829-4 - Conductivity / Turbidity Sensor for HI9829 Multiparameter
1 × ฿40,660.00
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
2 × ฿5,885.00
HI70080C - 800 mg/l (ppm) TDS@25°C Zert. - 25x20ml
1 × ฿2,033.00
HI70038C - 6.44 g/l (ppt) TDS@25°C Zert. - 25x20ml
1 × ฿2,033.00
HI9812-5 Multiparameter pH/EC/TDS/°C - EC to1990 µS/cm
1 × ฿10,807.00 Subtotal: ฿74,953.50
฿2,461.00
HI 9828-25 is a quick calibration solution to be used with HI 9828 and HI 9829 series multiparameter meter sensors.
20 in stock
HI 9828-25 is a quick calibration solution to be used with HI 9828 and HI 9829 series multiparameter meter sensors.
Order Information:
500 mL Bottle
| Weight | 0.000 kg |
|---|
The HI5521 is an advanced research grade benchtop pH/mV/EC/TDS/Salinity/Resistivity meter that is completely customizable with a large color LCD, capacitive touch keys, and USB port for computer connectivity. The HI5521 is rich in features including data logging, alarm limits, comprehensive GLP, and many more while retaining simplicity in use with both dedicated key for routine operation and virtual keys that guide the user through setup options. The HI5521 ensures confidence in pH measurements with the exclusive Hanna Instruments CAL Check™ feature that alerts the user to potential problems during calibration including if the buffer is contaminated or the probe needs to be cleaned.
The HI98195 is a waterproof portable logging multiparameter meter that monitors up to 10 different water quality parameters including 5 measured and 5 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, and temperature. The probe transmits readings digitally to the meter, where data points can be...
pH/ORP sensor, with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters.
Conductivity sensor, with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters.
Non-Logging probe for pH/pH+ORP/ISE, DO, EC (sensors not included), temperature without protective shield and 4 m (13.1’) cable.
HI991300 Multiparameter pH / EC / TDS / ° C waterproof - 0-3900 uS / cm / 0 to 2000 ppm (mg / L)
All Product
500 ml.
This product has multiple variants. The options may be chosen on the product page