The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU.
They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.
HI7035L - EC 111800 µS/cm@25°C - 500ml
1 × ฿963.00
เครื่องวัดอุณหภูมิอาหาร
1 × ฿7,900.00
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
1 × ฿3,103.00
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
1 × ฿12,305.00
HI706 Checker HC ® - Phosphorous, HR
1 × ฿3,105.14
HI731335 - Cap for Cuvette 4 pcs. - Serie HI967xx
1 × ฿802.50
เครื่องควบคุมค่าความนำไฟฟ้า
1 × ฿29,425.00
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
1 × ฿3,103.00
เครื่องวัดสีในน้ำตัวอย่าง HI727
1 × ฿3,103.00
ซัลไฟด์สารต้านอนุมูลอิสระบัฟเฟอร์
1 × ฿3,424.00
น้ำยามาตรฐานสอบเทียบ
1 × ฿2,461.00
HI7036L - 12.41 g/L (ppt) TDS @25°C - 500ml
1 × ฿963.00
HI701 Checker HC ® - Free Chlorine
1 × ฿3,103.00
เครื่องควบคุมค่าความนำไฟฟ้า
1 × ฿29,425.00
HI70080C - 800 mg/l (ppm) TDS@25°C Zert. - 25x20ml
1 × ฿2,033.00
สารละลายมาตรฐานความขุ่น 20 NTU
1 × ฿2,033.00 Subtotal: ฿107,251.64
฿1,391.00
The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU.
They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.
They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.
Order Information:
AMCO-EPA solution @ 0 FTU (30 mL)
1 in stock
The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU.
They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.
AMCO-EPA solution @ 0 FTU (30 mL) The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU. They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting. Order Information: AMCO-EPA solution @ 0 FTU (30 mL)
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from...
All Product
500 ml.
This product has multiple variants. The options may be chosen on the product pageGlass Cuvette (4 pcs) for Photometer HI 967xx Series and Turbidity Meter for HI93414 & HI98703
Water Analysis Parameters: Turbidity, Chlorine, pH, Bromine, Iron, Iodine and Cyanuric acid.