HI87314 EC / Resistivity Meter

HI 87314 is a combination, portable meter that can read conductivity in four different ranges and resistivity.

For conductivity measurements, a one-point calibration is performed via a trimmer located in the battery compartment. The supplied probe does not require recalibration when switching from one range to another. The four-ring (stainless steel) probe has a built-in temperature sensor that automatically compensates for temperature changes. The temperature coefficient can be adjusted from 0 to 2.5% using a knob on the front panel.

For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted. The HI 3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations. The temperature coefficient is user-selectable from 2 to 7%.

 

Order Information:   HI 87314 is supplied with HI 76302W conductivity probe, HI 3316D resistivity probe, HI 70030 calibration solution sachet, calibration screwdriver, battery, instructions and hard carrying case.

  Manual: Download

Specification :

Range	EC	199.9 µS/cm; 1999 µS/cm; 19.99 mS/cm; 199.9 mS/cm
	Resistivity	0 to 19.90 MO•cm
Resolution	EC	0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
	Resistivity	0.10 MO•cm
Accuracy @ 20°C	EC	±1% FS
	Resistivity	±2% FS
Calibration		Manual, 1 point, for both EC and resistivity
Temperature Compensation		Automatic from 0 to 50°C with ß selectable from 0 to 2.5%/°C for EC and from 2 to 7%/°C for resistivity
Probes		HI 76302W conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3’) cable; HI 3316D resistivity probe with internal temperature sensor, DIN connector and 1 m (3.3’) cable
Battery Type / Life		9V / approximately 100 hours of continuous use
Environment		0 to 50°C (32 to 122°F); RH max 100%
Dimensions		145 x 80 x 36 mm (5.7 x 3.1 x 1.4’’)
Weight		230 g (8.1 oz.)