PH/ORP Meters
Hand pH / ORP Meter with a pH electrode with integrated temperature sensor 12:00 bis14.00 pH, Temperature 0.0 to 100.0 ° C
Table turbidity meter + Free and Total Chlorine with 4 measuring ranges, USEPA compliant, dot matrix LCD, USB
HI 8410 uses a Galvanic probe that typically requires less maintenance than a Polarographic style making it ideal for long term monitoring.
The HI 8614LN is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector.
Controllers
The HI 8614N is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector.
The HI 8615LN with display uses a universal BNC socket for quick and secure connection of any ORP electrode with a BNC connector.
Controllers
The HI 8615N with display uses a universal BNC socket for quick and secure connection of any ORP electrode with a BNC connector.
Multi-Range EC meters with HI 76301D probe. With MTC - manual temperature compensation. 0.0 to 199.9 mS / cm.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic Temperature compensation probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
HI 8710 pH controller, ATC, Connection for electrode or the transmitter, 4-20 and 0-20 mA recorder output, For a combined application with the built-in regulator for HI 8720 ORP ORP dosing takes place exclusively at adequate pH level.
HI 8711 pH controller, ATC connection for electrode or the transmitter, 4-20 and 0-20 mA recorder output, 2 control points - 2 independent Dosing outputs
Inputs: BNC connector, Direct wire connection with amplified probe (supports HI 1006 series probes) and 4-20 mA from a transmitter
HI93721-01 Iron HR - Reagents -100 Tests						
น้ำยามาตรฐานสอบเทียบ						
HI1297D - pH/ORP-Electrode						
HI7072 Electrolyte Solution, 1M KNO³, 4 x 30 ml						
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ  รุ่น HI716						
HI70032C - 1382 mg/l (ppm) TDS@25°C  Cert. - 25x20ml						
ซัลไฟด์สารต้านอนุมูลอิสระบัฟเฟอร์						
HI70080C - 800 mg/l (ppm) TDS@25°C  Zert. - 25x20ml						
HI701 Checker HC ® - Free Chlorine						
เครื่องวัดสีในน้ำตัวอย่าง HI727						
เครื่องควบคุมค่าความนำไฟฟ้า						
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ  รุ่น HI708						
HI8410 Dissolved Oxygen Controller with 4 to 20mA						
				
				
				
				
				
				
				
				
				
				
