PH/ORP Meters
Hand pH / ORP Meter with a pH electrode with integrated temperature sensor 12:00 bis14.00 pH, Temperature 0.0 to 100.0 ° C
Table turbidity meter + Free and Total Chlorine with 4 measuring ranges, USEPA compliant, dot matrix LCD, USB
HI 8410 uses a Galvanic probe that typically requires less maintenance than a Polarographic style making it ideal for long term monitoring.
The HI 8614LN is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector.
The HI 8614N is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector.
The HI 8615LN with display uses a universal BNC socket for quick and secure connection of any ORP electrode with a BNC connector.
Process controllers
The HI 8615N with display uses a universal BNC socket for quick and secure connection of any ORP electrode with a BNC connector.
Multi-Range EC meters with HI 76301D probe. With MTC - manual temperature compensation. 0.0 to 199.9 mS / cm.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic Temperature compensation probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
HI 8710 pH controller, ATC, Connection for electrode or the transmitter, 4-20 and 0-20 mA recorder output, For a combined application with the built-in regulator for HI 8720 ORP ORP dosing takes place exclusively at adequate pH level.
HI 8711 pH controller, ATC connection for electrode or the transmitter, 4-20 and 0-20 mA recorder output, 2 control points - 2 independent Dosing outputs
Inputs: BNC connector, Direct wire connection with amplified probe (supports HI 1006 series probes) and 4-20 mA from a transmitter
HI1005 - pH Electrode, Flow-thru Monitoring for PCA
Calibration Standard HI 701 Checker HC ®
HI4013-03 ISE 1000 mg/L (ppm) Nitrate Std , 500 ml Bottle
HI1297D - pH/ORP-Electrode
HI73127 Spare-pH-Electrode for Tester
HI2020 edge™ - pH Meter
HI7074L - RfE - Anorganische Substanzen - 500ml
Reinigungsmittel anionisch - Reagenzien-Kit - 100 Tests
HI981402 pH-Indicator with LED-Alarm & Electrode PRONTO
HI62911D - pH/°C Electrode
HI7021L - 240mV ORP Test Solution - 500ml
HI716 Checker HC ® - Bromine
HI93703-0 AMCO-AEPA-1 Calibration Solution at 0 FTU, 30 ml
CTK Chlor Frei
HI6007-01 - 7.010 pH@25°C - MQ - 1000ml
HI1143B - Electrode (Fluoride Application)
HI38054 CTK Ozone
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
HI93754B-25 Medium Range COD Reagent (0 to 1500 mg/L)
CTK Härte Gesamt
HI93704-01 Hydrazine - Reagents - 100 Tests
HI8614LN pH - Transmitter with LCD, 4 to 20 mA Ouput



