HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI5006 - 6.00 pH@25°C - TQ - 500ml
HI8931CN Conductivity Controller (1 uS/cm resolution) with Input from Probe or Transmitter
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
HI755-26
HI731319 Micro Stir Bars for Magnetic Stirrers
HI93531 K-Type 1-Channel Handheld-Thermometer
HI38067-100 - Reagents for CTK Silica HR
HI7075 Electrode filling solution 1.7M KNO3 + 0.7M KCl, 4 x 30 ml
HI70480 Free-chlorine reagent kit for PCA Series
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
เครื่องวัดค่าการนำไฟฟ้า/ของแข็งละลายในน้ำ/ความเค็ม รุ่น HI5321 พร้อมรองรับ USP
HI766F K-Type, High Temperature Probe
เครื่องวัดคุณภาพน้ำแบบหลายพารามิเตอร์ รุ่น HI98195 (pH/ORP/EC/Pressure/Temperature)
HI70030P - EC 12880 µS/cm@25°C - 25x20ml
สารละลายมาตรฐานสำหรับสอบเทียบค่ากรด-ด่าง (HI7007L)
HI98183 pH / ORP / °C Meter + PC Interface, Waterproof
HI3002 - Submersion Conductivity Process Probe
HI93733-01 Ammonia HR - Reagents - 100 Tests
เครื่องวัดค่าความขุ่น คลอรีนรวมและอิสระ แบบภาคสนาม รุ่น HI93414
เครื่องวัดปริมาณซิลิกา ช่วงสูง รุ่น HI770
เครื่องวัดปริมาณคลอรีนรวม ช่วงสูงมาก รุ่น HI771
HI768L Pt100-Type, 4-Wire Air /Liquid
HI7031L - EC 1413 µS/cm@25°C - 500ml
HI38039-100 - Reagents for CTK Iron LR
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
สารละลายมาตรฐานสำหรับสอบเทียบ AMCO-AEPA-1/20 NTU รหัส HI93102-20
HI3820 CTK Acidity
Reagents for HI 711 (Total Chlorine) Checker HC ® (Total), 25 Tests
HI93748-01 Manganese LR - Reagents - 50 Tests
เครื่องวัดค่าเหล็ก รุ่น HI721
สารละลายมาตรฐานความขุ่น 20 NTU 

