HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
เครื่องวัดสีในน้ำตัวอย่าง HI727
HI8314 pH/mV/°C Meter- DIN type - custom calibration
HI3835 CTK Salinity
HI7071 Electrolyte Solution 3.5 M KCl + AgCl, 4 x 30 ml
HI700661P - RfE - Landwirtschaft - 25x20ml
HI5003 - 3.00 pH@25°C - TQ - 500ml
BL983320-1 EC Mini Controller 0 to 199.9 µS/cm, 230V
สารละลายมาตรฐานความขุ่น 20 NTU
HI7073L - Proteins - 500ml
HI3847 CTK Copper
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI70030C - EC 12880 µS/cm@25°C Zert. - 25x20ml
HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode
HI903 Karl Fischer Volumetric Titrator - 100ppm to 100%
เครื่องควบคุมค่าความนำไฟฟ้า
HI7021L - 240mV ORP Test Solution - 500ml
HI98121 COMBO pH/ORP/°C-Tester, waterproof
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI8936CN EC - Transmitter - 0 to 1999 µS/cm
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717 

