HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
HI7081L 30 g/L Na solution for Sodium ISE, 500 ml Bottle
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
HI70032C - 1382 mg/l (ppm) TDS@25°C Cert. - 25x20ml
HI5007 - 7.01 pH@25°C - TQ - 500ml
HI716 Checker HC ® - Bromine
HI98120 ORP/°C-Tester, waterproof
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI7034L - EC 80000 µS/cm@25°C - 500ml
HI70630L - RfE - Fleisch - 500ml
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
เครื่องวัดค่าเหล็ก รุ่น HI721
HI7091L - Reducing Pretreatment Solution, 500 ml
HI70031C - EC 1413 µS/cm@25°C Zert. - 25x20ml
HI38039-100 - Reagents for CTK Iron LR
HI76405 Electrode Holder with Steel Base
สารละลายมาตรฐานความขุ่น 20 NTU
HI6100405 - AmpHel Flat Tip Process pH Electrode
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
HI11310 Digital pH-Electrode, Glass, refillable (edge)
HI98121 COMBO pH/ORP/°C-Tester, waterproof
HI38040 CTK Iron Medium Range
HI70480 Free-chlorine reagent kit for PCA Series
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733
HI3822 CTK Sulfite
น้ำยามาตรฐานสอบเทียบ
HI761 Checker HC ® - Total Chlorine, ULR
HI739 Checker HC ® - Fluoride. HR
HI96821 Sodium Chloride - Digital Refractometer Portable
HI93531 K-Type 1-Channel Handheld-Thermometer
HI93501N FOODCARE Thermistor-Thermometer
HI3874 CTK Nitrate
HI727 Checker HC ® - Color of Water
เครื่องวัดค่าการนำไฟฟ้า สำหรับน้ำบริสุทธิ์สูง (UPW) รุ่น HI98309
HI93719-01 Hardness Magnesium - Reagents -100 Tests
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm 



