HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
HI766TR1 K-Type, Long Penetration Probe
เครื่องวัดคลอรีน
สารละลายมาตรฐานความขุ่น 20 NTU
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI4013-06 Nitrate Interferent Suppressant ISA, 500 ml Bottle
HI5004 - 4.01 pH@25°C - TQ - 500ml
สารเคมีสำหรับวัดค่าโอโซน HI93757-01 (100 Tests)
HI4010-00 TISAB II for Fluoride ISE, 500 ml Bottle
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI7074L - RfE - Anorganische Substanzen - 500ml
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
HI6100205 - AmpHel Flat Tip (Acid with Fluoride ions) Process pH Electrode
HI4013-06 Nitrate Interferent Suppressant ISA, 500 ml Bottle
HI3815 CTK Chloride
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700
HI717 Checker HC ® - Phosphate, HR
HI768L Pt100-Type, 4-Wire Air /Liquid
HI98303 DiST®3 EC-Tester (up to 1999 µS)
HI6013 - 13.000 pH@25°C - MQ - 500ml
HI7034L - EC 80000 µS/cm@25°C - 500ml
HI93703C Turbidity Meter ISO 7027 with Calibration Standard & Casing
HI7061L - Electrode Cleaning Solution (General) - 500ml
เครื่องวัดค่าเหล็ก รุ่น HI721
HI713 Checker HC ® - Phosphate, LR
HI93721-01 Iron HR - Reagents -100 Tests
HI11310 Digital pH-Electrode, Glass, refillable (edge)
HI3833-050 - Reagents for CTK Phosphate
HI7635 - Industrial Conductivity Probe
HI708 Checker HC ® - Nitrite, HR
HI38040 CTK Iron Medium Range
เครื่องวัดปริมาณฟอสฟอรัส ช่วงสูง รุ่น HI706
เครื่องวัดสีในน้ำตัวอย่าง HI727
HI716 Checker HC ® - Bromine
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI10430 Digital pH-Electrode, High-Temperature-Glass, Refillble (edge)
HI2211 Basic pH / ORP / °C Meter / 2-Point Calibration
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
น้ำยามาตรฐานสอบเทียบ
เครื่องวัดปริมาณแอมโมเนีย ช่วงสูง รุ่น HI733 


