HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI99301 EC / TDS / °C Meter upto 20 mS
HI5009 - 9.00 pH@25°C - TQ - 500ml
HI6100405 - AmpHel Flat Tip Process pH Electrode
HI99300 EC / TDS / °C Meter to 3999 µS
HI7034L - EC 80000 µS/cm@25°C - 500ml
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
HI5001 - 1.00 pH@25°C - TQ - 500ml
HI770 Checker HC ® - Silica, HR
สารเคมีวัดค่าไนเตรต HI782-25 ยี่ห้อ HANNA สำหรับวัดน้ำในตู้เลี้ยงปลาทะเล
HI76405 Electrode Holder with Steel Base
HI1001 Industrial-pH-Electrode "Flow-thru" Monitoring, PVDF BNC, 3 m Cable
HI983302N EC Indicator up to 9.99 mS with Electrode GRO'CHEK
HI7022L - 470mV ORP Test Solution - 500ml
HI70630L - RfE - Fleisch - 500ml
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
น้ำยามาตรฐานสอบเทียบ
HI11310 Digital pH-Electrode, Glass, refillable (edge)
เครื่องวัดปริมาณแอมโมเนีย ในน้ำ รุ่น HI715
HI7078 Electrolyte solution 4 x 30 ml
CTK Härte Gesamt
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI711 Checker HC ® - Total Chlorine
HI4007-02 ISE 100 mg/L (ppm) Chloride Std , 500 ml Bottle
HI710006 Power Adapter, 230 Vac to 12 VDC, European Plug
HI98120 ORP/°C-Tester, waterproof
HI7662 Temperature Probe
HI99301 EC / TDS / °C Meter upto 20 mS
BL983322-1 EC Mini Controller, 0 to 19.99 µS/cm, 230V
HI6074 - 7.400 pH@25°C - MQ - 500ml
น้ำยาสอบเทียบมาตรฐานแบบรวดเร็ว (HI5036-050)
HI98304 DiST®4 EC-Tester (up to 19.99 mS)
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701 


