HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer.
Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.
Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
- Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Hanna offers a complete line of cleaning solutions engineered for specific applications.
หัววัดค่ากรด-ด่าง แบบดิจิตอล รุ่น HI11311 พร้อม Matching pin ใช้งานสำหรับตัวอย่างทั่วไป
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI93707-01 Nitrite LR - Reagents - 100 Tests
HI5012 - 12.00 pH@25°C - TQ - 500ml
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI5001 - 1.00 pH@25°C - TQ - 500ml
HI4113 - Nitrate ISE, Polymer membrane Combination
เครื่องวัดค่ากรด-ด่าง/โออาร์พี แบบภาคสนาม สำหรับอุตสาหกรรมทั่วไป รุ่น HI991003
น้ำยามาตรฐานสอบเทียบ
เครื่องวัดปริมาณฟอสฟอรัส ช่วงสูง รุ่น HI706
HI8710 pH analog Controller with Self Diagnostic
HI4108 - Feststoffelektrode, kombiniert
HI4115 - Silver/Sulfide ISE, Solid-state Combination
หัววัดค่าการนำไฟฟ้า/ของแข็งละลายในน้ำ แบบ Four ring รุ่น HI76309 รวมหัววัดอุณหภูมิในตัว (Platinum)
สารละลาย ISA สำหรับวัดค่าไอออนโซเดียม (HI7090L)
HI38054 CTK Ozone
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI93746-01 Iron LR - Reagents -100 Tests
HI3002 - Submersion Conductivity Process Probe
HI6012 - 12.000 pH@25°C - MQ - 500ml
HI70007C - 7.01 pH@25°C - SQ Zert. - 25x20ml
ผ้าเช็ดหลอดแก้ว จำนวน 4 ชิ้น (HI731318)
FC100B - pH Elektrode
สารเคมีสำหรับวัดค่าแคลเซียม HI937521-01 (50 Tests)
HI1005 - pH Electrode, Flow-thru Monitoring for PCA
HI5002 - 2.00 pH@25°C - TQ - 500ml
HI6010 - 10.010 pH@25°C - MQ - 500ml
HI98121 เครื่องวัดค่า pH/ORP Meter แบบปากกา จากแบรนด์ Hanna
เครื่องวัดค่าความเค็ม สำหรับน้ำทะเล รุ่น HI98319
HI4000-00 ISA Halide ISE, 500 ml Bottle
หลอดแก้ว จำนวน 4 ชิ้น (HI731331) ใช้งานกับเครื่องรุ่น HI977XX & HI93414 & HI98703
สารละลายมาตรฐานโซเดียม 3 g/L (HI7083L)
HI3896-025 - Reagenzien für CTK Bodenanalysen
เครื่องวัดปริมาณแอมโมเนีย ช่วงต่ำ รุ่น HI700 

