Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Volumetric titrator
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
เครื่องวัดปริมาณคลอรีนอิสระ รุ่น HI701
HI711 Checker HC ® - Total Chlorine
HI93714-01 Cyanide - Reagents - 100 Tests
HI99300 EC / TDS / °C Meter to 3999 µS
Turbidity (EPA method) and Chlorine Portable Meter - HI93414
HI700 Checker HC ® - Ammonia, LR
HI4004-01 ISE 0.1M Calcium Std , 500 ml Bottle
HI717 Checker HC ® - Phosphate, HR
HI5321 Research Grade EC/TDS/Salinity/Resistivity Meter with USP
HI7034L - EC 80000 µS/cm@25°C - 500ml
FC210B - pH Elektrode
HI991300 Multiparameter pH/EC/TDS/°C - EC to 3999 µS
HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof
HI70032C - 1382 mg/l (ppm) TDS@25°C Cert. - 25x20ml
เครื่องวัดคลอรีน
HI5003 - 3.00 pH@25°C - TQ - 500ml
HI715 Checker HC ® - Ammonia, MR
Reagents for Freshwater Alkalinity HI 775 Checker HC ®, 25 Tests
HI4005-53 Carbon Dioxide membrane kit (3 caps)
HI98107 pHep pH -Tester (0.1 pH Resolution)
HI7091L - Reducing Pretreatment Solution, 500 ml
HI93703-0 AMCO-AEPA-1 Calibration Solution at 0 FTU, 30 ml
HI2003 - edge® Dedicated Conductivity/TDS/Salinity Meter
HI9812-5 Multiparameter pH/EC/TDS/°C - EC to1990 µS/cm
HI9828-25 - Quick Calibration Solution, 500 mL
HI5421 Research Grade Dissolved Oxygen and BOD Meter
HI93712-01 Aluminium - Reagents - 100 Tests
HI7001L - 1.68 pH@25°C - SQ - 500ml
HI705 Checker HC ® - Silica, LR
HI771 Checker HC ® - Chlorine, Ultra-High Range
เครื่องวัดปริมาณฟอสเฟต ช่วงต่ำ รุ่น HI713
BL981411-1 pH Mini Controller (Res 0.1pH) - 220V
BL932700-1 ORP Mini Controller +/-1000mV - 4 to 20mA output - 220 V
HI3831T CTK Chlorine Total
HI1043B - pH Electrode for high temperature & strong acid
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%