Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Controllers
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
Controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI768L Pt100-Type, 4-Wire Air /Liquid
HI7609829-4 - Conductivity / Turbidity Sensor for HI9829 Multiparameter
เครื่องวัดปริมาณซิลิกา ช่วงต่ำ ในตัวอย่างน้ำ รุ่น HI705
เครื่องวัดปริมาณคลอรีนรวม รุ่น HI711
เครื่องวัดสีในน้ำตัวอย่าง HI727
HI93740-01 Nickel LR - Reagents - 50 Tests
น้ำยามาตรฐานสอบเทียบ
HI7609829-2 - Dissolved Oxygen Sensor for HI9829 Multiparameter
HI93750-01 Potassium - Reagents - 100 Tests
HI98303 DiST®3 EC-Tester (up to 1999 µS)
เครื่องวัดปริมาณโครเมี่ยม ช่วงสูง รุ่น HI723
HI6004 - 4.010 pH@25°C - MQ - 500ml
HI3873 CTK Nitrite
HI5006 - 6.00 pH@25°C - TQ - 500ml
HI3314 - Resistivity Probe for BL983314 Mini Controller
เครื่องควบคุมค่าความนำไฟฟ้า
เครื่องวัดปริมาณฟอสฟอรัส ช่วงต่ำมาก รุ่น HI736
HI98128 pH/°C-Tester (0.01 pH resolution) - waterproof
HI93701-01 Chlorine Free Reagents - 100 Tests
สารละลายมาตรฐานความขุ่น 20 NTU
FC220B - pH Elektrode
HI766E2 K-Type, General Purpose w Cable
HI8936CN EC - Transmitter - 0 to 1999 µS/cm
pH/EC/°C Multiparameter Probe for HI 9811-5, HI 9812-5 & HI 9813-5
สารเคมีวัดค่าไนเตรต HI782-25 ยี่ห้อ HANNA สำหรับวัดน้ำในตู้เลี้ยงปลาทะเล
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
HI3818 CTK Carbon Dioxide
HI70032C - 1382 mg/l (ppm) TDS@25°C Cert. - 25x20ml
HI3812 CTK Hardness Total
HI93709-01 Manganese HR - Reagentst - 100 Tests
HI93746-01 Iron LR - Reagents -100 Tests
HI726 Checker HC ® - Nickel, HR
HI7073L - Proteins - 500ml
น้ำยามาตรฐานสอบเทียบ ค่ามาตรฐานความเค็ม
HI60004-02 - 4.010 pH@25°C - MQ - 25x20ml
HI7021L - 240mV ORP Test Solution - 500ml
HI710006 Power Adapter, 230 Vac to 12 VDC, European Plug
HI7030L - EC 12880 µS/cm@25°C - 500ml
HI76301D Four ring Conductivity probe
HI93531 K-Type 1-Channel Handheld-Thermometer
HI1005 - pH Electrode, Flow-thru Monitoring for PCA
HI4016-02 ISE 100 mg/L (ppm) Sodium Std , 500 ml Bottle
H3895 CTK Agriculture, Basic
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI731335 - Cap for Cuvette 4 pcs. - Serie HI967xx
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm
HI70004P - 4.01 pH@25°C - SQ - 25x20ml
HI904 Karl Fischer Coulometric Titrator - 1ppm to 5%