Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Transmitter
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Process controllers
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
All Product
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Automatic Titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Automatic Titrators
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Coulometric titrator
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Coulometric titrator
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI93703-10 AMCO-AEPA-1 Calibration Solution at 10 FTU, 30 ml
HI38000 CTK Sulfate
สารละลายมาตรฐานความขุ่น 20 NTU
BL1.5 Black Stone Dosing Pump 1.5lph 13 bar
CTK Härte Gesamt
HI38040 CTK Iron Medium Range
Reagents for HI 733 Checker HC ®, 25 Tests
HI93732-01 Dissolved Oxygen - Reagents - 100 Tests
HI6200405 - AmpHel Process ORP Electrode
HI7004L - 4.01 pH@25°C - SQ - 500ml
Reagents for HI 758 Checker HC ®, 25 Tests
HI93740-01 Nickel LR - Reagents - 50 Tests
HI3810-100 - Reagents for CTK Dissolved Oxygen
เครื่องวัดปริมาณไนไตรท์ ช่วงสูง ในตัวอย่างน้ำ รุ่น HI708
HI764 Checker HC ® - Nitrite, ULR
HI10430 Digital pH-Electrode, High-Temperature-Glass, Refillble (edge)
BL983313-1 EC Mini Controller, 0 to 1999 µS/cm, 230V
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI755 Checker HC ® - MARINE Alkalinity (dHK)
HI93712-01 Aluminium - Reagents - 100 Tests
HI93750-01 Potassium - Reagents - 100 Tests
HI4014-01 0.1 M Potassium Standard
Calibration Standard HI 755 Checker HC ®
HI713 Checker HC ® - Phosphate, LR
HI937520-01 Magnesium - Reagents -50 Tests
BL983327-1 EC Mini Controller upto 10.00 mS/cm, 230V
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm