Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe- is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
The conductivity transmitter Type HI 8936 has been redesigned and now uses a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. In addition, the integrated temperature sensor compensates the transmitter on the probe temperature-dependent effects. The probe is connected via a positive electrical connection to signal losses to avoid long lines. All this increases the power of the transmitter which significantly represent the HI 8936 devices in any position until a classic piece.
All Product
Conductivity Process Controller & Transmitter type HI 8936 uses a four-ring potentiometric probe-Sonde.Diese is virtually immune to contamination by unclean solutions. Moreover, the compensated, in the probe, simplified integrated temperature sensor and provides automatic compensation. The probe is connected to a positive electrical connection to signal loss to avoid long lines and to increase the performance of the controller.
Potentiometric titrators
HI902C1 – Titration System – Potentiometric – 1 analog board
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
Potentiometric titrators
HI902C2 – Titration System – Potentiometric – 2 analog boards
The HI 902C is an automatic titrator that complements our wide range of products dedicated to quick and accurate laboratory analysis. HI 902C can perform acid/base, potentiometric, ORP, complexometric, precipitation, back titrations and titre determinations.
The HI 903 Karl Fischer Volumetric Titrator for moisture analysis is an extension of HANNA’s highly successful potentiometric titrator platform. The HI 903 combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms.
Multi-Range EC meters with HI 76302W probe, waterproof. With ATC - Automatic Temperature Compensation. 0.0 to 199.9 mS / cm.
Multi-range hand-TDS meter incl HI 76302W probe, DIN connector, 1 m cable. ATC - Automatic Temperature Compensation. Ranges: 0.0 to 199.9 mg / L (ppm) 0 to 1999 mg / L (ppm) 0.00 to 19.99 g / L (ppt).
Automatic Titrators
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
Automatic Titrators
HI904D Karl Fischer Coulometric Titrator with Diaphragm Generator – 1ppm to 5%
The HI 904 excels at determining water content in extremely small concentrations (1 ppm to 5%) and requires no titrant, instead using a generator electrode.
HI98120 ORP/°C-Tester, waterproof
HI758 Checker HC ® - MARINE Calcium
FC220B - pH Elektrode
HI755 Checker HC ® - MARINE Alkalinity (dHK)
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option
HI713 Checker HC ® - Phosphate, LR
HI2001 - ORP Electrode Process
FC232D - Foodcare pH-Elektrode für HI 99161, DIN, 1 m Kabel (Fleisch)
น้ำยามาตรฐานสอบเทียบ
HI93751-01 Sulfate - Reagents - 100 Tests
HI93754B-25 Medium Range COD Reagent (0 to 1500 mg/L)
BL983329-1 TDS Mini Controller 0.0 to 999 mg/L (ppm) - 230V
เครื่องวัดอุณหภูมิอาหาร
HI11310 Digital pH-Electrode, Glass, refillable (edge)
HI38000 CTK Sulfate
เซ็นเซอร์วัดออกซิเจนในน้ำสำหรับ HI9829 มัลติพารามิเตอร์
HI7042S Refilling Solution for Galvanic Probe, 30ml
CTK Härte Gesamt
HI38061 CTK Phosphate
HI98129 COMBO Tester for pH/EC/TDS/C° up to 3999 µS, waterproof
BL982411-1 ORP Mini Controller upto 1000mV - 230V
HI98311 DiST®5 EC/TDS/C°-Tester, (0-3999 µS/cm - 0-2000 mg/l (ppm)) waterproof
HI771 Checker HC ® - Chlorine, Ultra-High Range
BL931700-1 pH Mini Controller - 4 - 20mA output - 220V
CTK Chlor Frei
HI1001 Industrial-pH-Electrode "Flow-thru" Monitoring, PVDF BNC, 3 m Cable
HI98103 CHECKER pH -Tester (0.01 pH Resolution)
BL981411-1 pH Mini Controller (Res 0.1pH) - 220V
HI10430 Digital pH-Electrode, High-Temperature-Glass, Refillble (edge)
HI7001L - 1.68 pH@25°C - SQ - 500ml
HI723 Checker HC ® - Chromium VI, HR
HI7662 Temperature Probe
BL983318-1 TDS Mini Controller 0.0 to 10.00 g/L (ppt) - 230V
HI98127 pH/°C-Tester (0.1 pH resolution) - waterproof
เครื่องวัดปริมาณโบรมีน ในตัวอย่างน้ำ รุ่น HI716
HI717 Checker HC ® - Phosphate, HR
เครื่องวัดปริมาณฟอสเฟต ช่วงสูง รุ่น HI717
BL983320-1 EC Mini Controller 0 to 199.9 µS/cm, 230V
HI736 Checker HC ® - Phosphorous, ULR
HI98308 PWT - Pure Water Tester - Conductivity (up to 99.99 µS/cm)
HI8936DN EC - Transmitter - 0.0 to 199.9 µS/cm