Name: HI983303 EC Monitor up to 1999 µS with LED-Alarm and Inline EC PRONTO
SKU: HI983303-02
Price: 4815.00 THB
Availability: OutOfStock

Water resistant
Continuous EC monitoring
Visual LED alarms

This water resistant conductivity meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.

HI 983303-02 is supplied with a direct 2-pin probe and 2 m (6.6′) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.

Order Information: HI 983303-02 (230V) is supplied with HI 7634/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.

Specification :

Range		0 to 1990 µS/cm
Resolution		10 µS/cm
Accuracy		±2% F.S.
Calibration		manual, 1 point through trimmer
Calibration Solution		HI 70031
Temperature Compensation		automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint		200 to 1600 µS/cm
Alarm		red LED blinks when measured value differs from set point more than 100 µS/cm
Probe		HI 7634/2 with 2 m (6.6′) cable and ½” thread (included)
Power Supply		12 Vdc power adapter (included)
Environment		0 to 50°C (32 to 122°F); RH max 100%
Dimensions		86 x 110 x 43 mm (3.4 x 4.3 x 1.7″)
Weight		215 g (7.6 oz.)